Mitox CS38 - User Manual

Operator’s Manual
user manual, maintenance instructions and spare parts
CS38 / CS41 SELECT Chainsaw
www.mitox.co.uk
Read this manual carefully before operating the machine
Original Instructions Version July 16
CS38-41_130716

Summary

Component Location

Manual Warnings and Safety Symbols

Engine Controls and Operation

Choke Operation Modes

Starting modes for hot and cold engines.

Carburetor Adjustment Screws

Adjusting high-speed, low-speed, and idle settings.

Chain Brake Release and Activation

Safety Precautions

Work Clothing and Safety Equipment

Pre-Operation Safety Checks

Engine Start and Operation Procedures

Fuel Handling and Safety

Safe Fuel Handling Precautions

Precautions for handling flammable fuel.

Two-Stroke Fuel Mixture Guidelines

Recommended fuel mix ratio and oil specifications.

Fuel Storage and Usage Warnings

Refuelling and Chain Oiling Procedures

Installing the Guide Bar and Chain

Chain Brake System Operation

Chain Brake Operation Check

Cutting Safety Regulations

Kickback Safety Precautions

Operating the Engine Guide

Engine Starting and Stopping Procedures

Hot Engine Start Procedure

Safe Engine Stopping Procedure

Chainsaw Maintenance Overview

Checking Oil Supply

General Care and Maintenance

Routine Maintenance: Air Filter

Routine Maintenance: Guide Bar and Oiling Port

Oiling Port and Guide Bar Cleaning

Periodical Service Points

Cylinder Fins Cleaning

Fuel Filter Maintenance

Spark Plug Maintenance

Sprocket Inspection

Adjusting Oil Flow Rate

Saw Chain Sharpening Guide

Carburetor Adjustment Procedure

Service Schedule

Troubleshooting: Power Loss or Engine Stopping

Specifications: CS38 Select

Specifications: CS41 Select

Mitox CS38 Specifications

General

Engine Type	2-stroke
Engine Displacement	37.2 cm³
Power Output	1.2 kW
Bar Length	35 cm
Weight	4.9 kg
Chain gauge	0.050"