Maintenance
• After every use, check that all nuts, bolts and screws are securely fastened and
tighten if necessary.
• In the event of an accident, breakdown or blockage, ensure the engine is turned o
before any work is carried out to rectify this.
• Make sure the engine has stopped and is cool before performing any service to the
machine. Contact with moving cutting head or hot muer may result in a personal
injury. Always wear heavy-duty gloves when handling the blades.
Maintenance After Each Use
Air filter
Dust on the air cleaner surface can be removed by tapping a corner of the cleaner against a hard
surface. To clean dirt in the meshes, split the cleaner into halves and brush o the dust lightly or
wash in non-inflammable solvent, or replace the air filter.To assemble the cleaner halves, press until
it clicks.
IMPORTANT
!
To Next Page
Loading...
