Need help?Do you have a question about the Mitsubishi Electric D700 and is the answer not in the manual?
General| kW Range | 0.4kW to 7.5kW |
|---|---|
| Communication Protocol | Modbus RTU, Built-in RS-485 |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit, Ground Fault |
| Overload Capacity | 150% for 60 seconds |
| Braking Unit | Built-in (for some models), Optional external braking resistor |
| Cooling Method | Fan-cooled |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +65°C |
| Humidity | 95% RH or less (non-condensing) |
| Altitude | Up to 1000 m (3300 ft) above sea level, derate above 1000m |
| Enclosure Rating | IP20 |
| Power Range | 0.4kW to 7.5kW |
Details critical safety instructions, defining DANGER and CAUTION levels for safe operation.
Lists and describes the various models available in the FR-D700 series.
Guidance on checking the inverter's capacity and identifying its rating plate.
Steps for verifying the product and identifying its components upon receipt.
Illustrates terminal connections and provides essential wiring precautions.
Discusses system failsafe methods and interlocks for reliable operation.
Lists and explains various parameters for configuring the inverter's functions.
Details the components and functions of the inverter's operation panel.
Explains the default operation mode and basic controls of the inverter.
Guides through setting the operation mode based on start command and speed.
To Next Page