Need help?Do you have a question about the Mitsubishi Electric E1151 and is the answer not in the manual?
Safety requirements for UL and cUL installations in hazardous locations.
General safety precautions for installation, operation, and maintenance.
Safety measures during use, service, maintenance, and dismantling.
Specifies the physical space needed around the operator panel for installation.
Outlines the general steps for installing the operator panel.
Covers mode switches, controller connections, and peripheral setup.
Resistance of the frame and casing material to various chemicals.
Resistance of Autotex F157/F207 overlay to chemicals.
Resistance of the touch screen surface to various solvents.
Resistance of Autoflex EB protection film to chemicals.
Pin assignments and signal details for various communication ports.
Dimensional drawings and layout of the E1151 operator panel.
Proper grounding techniques and shield management for reliable installation.
Guidelines for establishing Ethernet connections within the panel for optimal performance.
Methods to improve Electromagnetic Compatibility (EMC) protection during installation.
Guidelines and considerations for managing ambient temperature around the operator panel.
Safety measures for power supply, electrical connections, and galvanic isolation.
Guidelines for RS485 cable type, termination, and bus configuration.
General| Power Supply | 24V DC |
|---|---|
| Display Type | TFT LCD |
| Backlight | LED (service life: 50000 hours (time until the luminance becomes 50% of the initial value at normal temperature*1)) |
| Touch Panel | Resistive |
| Communication Interface | RS-232C, Ethernet |
| CPU | RISC |
| Operating Temperature | 0 to 55°C |
| Storage Temperature | -20°C to 60°C |
| Shock Resistance | Compliant with IEC 61131-2 |
To Next Page