To Next PageTo Next PageWhat does PU stop mean on Mitsubishi Electric FR-D720S-2.2K Inverter?
Stop with of the PU is set in Pr. 75 Reset selection/disconnected PU detection/PU stop selection. Turn the start signal OFF and release with .
General| Series | FR-D700 |
|---|---|
| Model | FR-D720S-2.2K |
| Output Power | 2.2 kW |
| Horsepower | 3 HP |
| Output Current | 11 A |
| Output Frequency | 0.5-400 Hz |
| Communication | RS-485 |
| Weight | 2.5 kg |
| Overload Capacity | 150% for 60 seconds |
| Cooling Method | Fan cooled |
| Input Voltage | 200-240 V |
| Output Voltage | 3-phase 200-240V AC |
| Rated Output Current | 11 A |
| Frequency Range | 0-400 Hz |
| Control Method | V/f control |
| Braking Unit | Built-in |
| Protection | Overload, Overvoltage, Undervoltage |
| Protection Features | Overcurrent, Overheat, Short circuit |
Lists essential checks and handling methods to prevent product damage or shortened lifespan.
Explains how to implement interlocks using inverter status output signals for accident prevention.
Provides a comprehensive list of all parameters, their settings, initial values, and refer pages.
Covers PID control, dancer control, and regeneration avoidance functions for advanced operations.
Provides guidance on identifying and resolving common inverter faults, alarms, and operational issues.
Explains how to select and protect the motor, including overheat protection and auto tuning.
Explains automatic restart and power-failure deceleration stop functions for maintaining operation.
Covers functions like reset selection, parameter write disable, and password protection.
Describes procedures for resetting inverter faults and alarms, including auto reset.
Details functions like retry operation, phase loss protection, and earth fault detection.
Details how to select operation modes (PU, External, Network) and control sources.
Provides a comprehensive list of fault and alarm codes displayed on the operation panel with corresponding refer pages.
Explains how to assign functions to input and output terminals for various control operations.
Explains PU connector wiring, RS-485 communication, and Modbus-RTU specifications.
Details common causes for errors, warnings, alarms, and faults with corresponding corrective actions.
