To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric FX2N-232IF and is the answer not in the manual?
General| Communication Protocol | RS-232C |
|---|---|
| Number of Channels | 1 |
| Compatible Controllers | FX2N, FX1S, FX1N, FX3U, FX3UC |
| Baud Rate | 19200 bps |
| Data Length | 7/8 bits |
| Parity Check | Even/Odd/None |
| Stop Bit | 1/2 bits |
| Connector | D-sub 9-pin |
| Current Consumption | 40 mA (5V DC) |
Guidelines for designing safe system operations, emergency stops, and output control in case of PLC errors or failures.
Precautions to prevent electric shock and product damage during installation and wiring work.
Precautions for safe startup, operation, cleaning, and maintenance of the PLC.
Details procedures for creating programs and performing tests to validate N:N Network communication.
Provides guidance on creating programs for master and slave stations in the N:N Network.
Offers practical examples and explanations for implementing N:N Network programs.
Addresses common issues and provides solutions for troubleshooting N:N Network communication problems.
Provides guidance on creating programs for inverter communication, including checking related devices and common items.
Offers practical examples for inverter communication with FX2N and FX2NC PLCs.
Explains how to create programs for inverter communication with FX3S, FX3G, FX3GC, FX3U, and FX3UC PLCs.
Provides practical examples for inverter communication with FX3S, FX3G, FX3GC, FX3U, and FX3UC PLCs.
Addresses common issues and provides solutions for troubleshooting inverter communication.
Covers wiring procedures and connection diagrams for remote maintenance.
