Mitsubishi Electric MELSEC iQ-F Series - Transient Transmission

2 OPERATING GX Works3
2.4 Creating a Ladder Program
2 - 25
2
(From the previous page)
9. The added symbol ( ) is displayed.
10. Press the  key and the  key and
enter "Y170".
11. Press the  key after entering the device
number.
12. The added symbol ( ) is displayed.
13. Move the cursor to the ladder under .
14. Press the  key and enter "X103".
15. Press the  key after entering the device
number.
16. The added symbol ( ) is displayed.
17. Press the  key and enter "Y171".
18. Press the  key after entering the device
number.
(To the next page)
10.
11.
9.
The symbol is displayed!
Press the
Enter key!
Press the Shift and F5
keys and enter "Y170"!
Y170
14.
15.
12.
The symbol is displayed!
13.
Move the cursor!
Press the F5 key
and enter "X103"!
Press the
Enter key!
Y170
Y170
17.
18.
16.
The symbol is displayed!
Press the
Enter key!
Press the F7 key
and enter "Y171"!
X103