Need help?Do you have a question about the Mitsubishi Electric MELSEC iQ-F FX5U and is the answer not in the manual?
General| Model | FX5U |
|---|---|
| Series | MELSEC iQ-F |
| Built-in Ethernet Port | Yes |
| Built-in SD Card Slot | Yes |
| Built-in Positioning | Yes |
| Type | Programmable Logic Controller (PLC) |
| Number of I/O Points | Up to 256 points (with expansion) |
| Built-in I/O | Varies depending on model (e.g., 8DI/8DO, 16DI/16DO) |
| Expansion Modules | Yes |
| Communication Ports | Ethernet, USB, Serial (RS-485/RS-422) |
| Programming Language | Structured Text, Ladder Logic, Function Block Diagram |
| Power Supply | 24 VDC or 100-240 VAC |
| Operating Temperature | 0 to +55 °C |
| Dimensions | 90 mm (W) x 90 mm (H) |
| Weight | Approx. 0.6 kg |
Design precautions for safe system operation and error handling.
Precautions for safe and correct wiring to prevent damage or accidents.
Details on AC and DC power supply requirements and capacities for the CPU module.
Technical specifications for the 24 V DC input points, including voltage, current, and response.
Technical specifications for relay and transistor outputs, including load, response, and insulation.
Rules for calculating and limiting the total number of I/O points and remote I/O points.
Procedures for checking current consumption to ensure power supply capacity.
Steps and precautions before starting wiring work, including parts preparation and grounding.
Guidelines for proper grounding methods to ensure safety and prevent noise.
Examples of wiring for AC and DC power supplies, including sink and source input configurations.
Explains input wiring for 24 V DC, including sink/source selection and precautions.
Wiring examples for relay, transistor, and triac outputs, including protection circuits.
General steps to follow when an error occurs, including checking modules and LEDs.
To Next Page
