What causes a receive data error on a Mitsubishi Electric Controller?
A receive data error on your Mitsubishi Electric Controller means that the wrong data was received from the inverter. To correct this, check the wiring and look for the presence of noise.
Why does my Mitsubishi Electric MELSEC iQ-F show error CFE8H?
The Mitsubishi Electric Controller displays error code CFE8H when there is no response from a slave station. To resolve this, check the slave station disconnection detection setting in the master station parameter (Network Configuration Settings). Also, verify the existence status of the slave station in the network, and inspect the disconnected slave station. Finally, take measures to reduce noise.
What to do if Mitsubishi Electric Controller shows error CFE1H?
If your Mitsubishi Electric Controller shows error CFE1H, it means an unusable number of occupied stations has been specified from the master station. You should check the number of occupied stations setting in the master station parameter (Network Configuration Settings).
What to do if the Mitsubishi Electric MELSEC iQ-F Controller inverter does not start in Network operation mode?
If the Mitsubishi Electric Controller inverter fails to start in Network operation mode, verify that the inverter starting program is running and that it has been written correctly. Additionally, ensure that Pr.338 Communication operation command source is not set to External.
What does station number error mean on Mitsubishi Electric MELSEC iQ-F Controller?
A station number error on the Mitsubishi Electric Controller means that an unspecified station responded. To resolve this, check the parameter settings.
How to fix overrun error on Mitsubishi Electric MELSEC iQ-F Controller?
An overrun error on a Mitsubishi Electric Controller indicates that the inverter sent error code H5, meaning the computer sent the next set of data before the inverter completed receiving the previous data. Check the program.
How to resolve issues when unable to set some properties on Mitsubishi Electric MELSEC iQ-F?
If you find that you are unable to set certain properties on your Mitsubishi Electric Controller, it may be because the property is defined as unchangeable or unwritable according to the BACnet standard. Check the BACnet standard to confirm.
How to fix L ER LED turned on in Mitsubishi Electric Controller?
If the L ER LED is on, ensure that the Ethernet cables meet the standard. You might need to use an Ethernet cable that conforms to the standard. Also, make sure that the station-to-station distance is within the specified range. Replace any disconnected Ethernet cables. Check if the industrial switch is operating normally; use a standard-compliant switch and try power cycling it. Finally, check for any sources of noise near the module or cables and relocate them if necessary.
Why does my Mitsubishi Electric Controller show error CFE9H?
The Mitsubishi Electric Controller shows error CFE9H because the slave station of the same IP address has existed in the same network address. To fix this, check the slave station where the error occurred.
Why does my Mitsubishi Electric Controller show error CFD0H?
The Mitsubishi Electric Controller shows error CFD0H because the port No. (61450) used in CC-Link IE Field Network Basic has already been used. To solve this, check the port No. used in the Ethernet function.
General| Series | MELSEC iQ-F |
|---|---|
| Protection Class | IP20 |
| Type | Programmable Logic Controller (PLC) |
| I/O Capacity | 16 to 256 points (depending on the model) |
| Expandable I/O | Yes, via expansion modules |
| Communication | Ethernet, RS-485, CC-Link, MODBUS |
| Programming Language | Ladder Diagram (LD), Function Block Diagram (FBD), Structured Text (ST) |
| Power Supply | 24V DC or 100-240V AC |
| Program Memory Capacity | Up to 64K steps |
| I/O Points | 16 to 256 points (depending on configuration) |
| Operating Voltage | 100-240 VAC or 24 VDC (depending on model) |
| Operating Temperature | 0°C to 55°C |
| Built-in I/O | Yes, available on base units (digital I/O) |
Outlines categories of safety precautions and their meanings.
Details safety precautions for system operation, external circuits, and buffer memory.
Advises against bundling control and communication cables together.
Advises measures for system security against cyberattacks.
Details precautions for product installation and usage environment.
Provides precautions for handling conductive parts, drilling, ventilation, mounting, and wiring.
Details precautions for power supply, terminal covers, cable temperature rating, and screw terminal block wiring.
Advises on grounding methods and wiring practices to prevent damage and noise.
Warns about touching terminals, cleaning, program modification, multiple peripheral device access, and program creation.
Advises against disassembling/modifying, connecting/detaching cables, and attaching/detaching devices without power off.
Warns about interlock circuits, error handling, and sending safety-related data.
Details performance specifications related to CC-Link IE TSN, like station type and communication speed.
Details performance specifications for Ethernet communication, including speed and interface.
Instructs on connecting the Ethernet cable to the FX5-CCLGN-MS.
Guides on configuring the system and setting parameters for start-up.
Ensures security via network environment restrictions for access paths to the FX5 CPU module.
Details wiring methods for connecting and disconnecting Ethernet cables.
Provides precautions for Ethernet cable wiring, including bending radius and noise.
Allows configuring communication speed, mode, security, and other application-specific parameters.
Provides tools for parameter setting of device stations and network configuration.
Guides on checking module status via LED indications for troubleshooting.
Explains how to check module diagnostics, error information, and LED status.
Details using diagnostics tools for monitoring network status and troubleshooting.
Provides solutions for common symptoms encountered during operation.
Lists all error codes, their definitions, causes, actions, and detailed information.
To Next Page