Mitsubishi Electric MELSEC iQ-F Series - Setting in the master station

172
9 PROGRAMMING
9.3 Examples of Communication with CC-Link IE TSN Class A Remote Stations
Setting in the master station
Connect the engineering tool to the FX5 CPU module on the master station and set the parameters.
1. Set the FX5 CPU module as follows.
[Project]  [New]
2. Click the [Setting Change] button to use the module label.
3. Set the FX5-CCLGN-MS as follows.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]