Mitsubishi Electric MELSEC iQ-F Series - 9.3 Examples of Communication with CC-Link IE TSN Class A Remote Stations; System configuration

170
9 PROGRAMMING
9.3 Examples of Communication with CC-Link IE TSN Class A Remote Stations
9.3 Examples of Communication with CC-Link IE TSN
Class A Remote Stations
When "Communication Mode" is set to "Multicast", the local station cannot obtain data output by the CC-Link IE TSN Class A
remote station. Use the following communication examples so that the local station can obtain data output by the CC-Link IE
TSN Class A remote station.
System configuration
The following is an example of communications between the CC-Link IE TSN Class B master station (station No.0), CC-Link
IE TSN Class A remote station (station No.1), and local station (station No.2).
System configuration
• CPU module: FX5U-32MT/ES
• Master/local module: FX5-CCLGN-MS
• Remote module: CC-Link IE TSN Class A remote station
No.0: CC-Link IE TSN Class B master station (station No.0)
No.1: CC-Link IE TSN Class A remote station (station No.1)
No.2: CC-Link IE TSN Class B local station (station No.2)
No.0 Class B No.2 Class B
No.1 Class A
Industrial switch
(for CC-Link IE TSN Class A)