7 PARAMETER SETTINGS
7.4 Application Settings
137
7
7.4 Application Settings
Set the supplementary cyclic settings, transient transmission group number, and other settings for the FX5-CCLGN-MS.
Communication Speed
Set the communication speed.
For details on the connection of modules or devices based on the communication speed setting, refer to the following.
Page 64 SYSTEM CONFIGURATION
Item Description Reference
Communication Speed Set the communication speed. Page 137 Communication
Speed
Supplementary Cyclic Settings Set the station-based block data assurance and I/O maintenance settings. Page 138 Supplementary
Cyclic Settings
Transient Transmission Group No. Set the transient function. Page 138 Transient
Transmission Group No.
Communication Mode Set the communication mode. Page 138 Communication
Mode
Parameter Name Set a name for the module parameter if desired. Page 138 Parameter Name
Module Operation Mode Set the mode for the FX5-CCLGN-MS. Page 139 Module Operation
Mode
Security Set the security measures for access to the Ethernet device. Page 139 Security
Item Description Setting range
Communication Speed Select the communication speed. • 1Gbps
• 100Mbps
(Default: 1Gbps)
To Next Page
Loading...
