Mitsubishi Electric MELSEC iQ-F Series - Parameter processing of a device station

146
7 PARAMETER SETTINGS
7.5 "CC-Link IE TSN Configuration" Window
Parameter processing of a device station
This function reads and saves the parameters from the device station, and writes the saved parameters to the device station.
Also, it automatically sets parameters of the device station from the master station. ( Page 62 Device station parameter
automatic setting)
[Navigation window]  [Parameter]  [Module Information]  Ta r ge t mo du l e  [Basic Settings]  [Network
Configuration Settings]
Select and right-click the device station, and select "Parameter of Device Station" to display the "Parameter of Device Station"
window.