4 FUNCTIONS
4.3 Transient Transmission
47
4
Communications using the SLMP
This type of the data communication is used to read/write data from the external device, such as a personal computer or HMI
(Human Machine Interface), to devices in the CPU module of the master station and local station and the buffer memory
areas of the remote station via an SLMP.
The FX5-CCLGN-MS operates as the SLMP server, and sends and receives SLMP messages. For details on SLMP, refer to
the following.
MELSEC iQ-F FX5 User's Manual (Communication)
For SLMP communications, set the same communication speed for the connected station and access destination. If the
communication speed differs between the connected station and access destination, SLMP communications may not be
performed.
Communications using the engineering tool
This type of the data communication is used to perform the settings of or monitor each station using the engineering tool.
To Next Page
Loading...
