9 PROGRAMMING
9.3 Examples of Communication with CC-Link IE TSN Class A Remote Stations
175
9
10. Set the items in "Application Settings" as follows.
[Navigation window] [Parameter] [Module Information] [FX5-CCLGN-MS] [Application Settings]
11. Click the [Apply] button.
12. Write the set parameters to the FX5 CPU module on the master station. Then, reset the FX5 CPU module or power off
and on the system.
[Online] [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
Page 129 PARAMETER SETTINGS
Remote station settings
Set the setting of the IP address set in "Network Configuration Settings" of the master station.
To Next Page
Loading...
