Mitsubishi Electric MELSEC iQ-F Series - 5.3 Structure of CC-Link IE TSN Class B;A Devices (Mixture of CC-Link IE TSN Protocol Version 1.0 and 2.0) and Ethernet Devices

92
5 SYSTEM CONFIGURATION
5.3 Structure of CC-Link IE TSN Class B/A Devices (Mixture of CC-Link IE TSN Protocol Version 1.0 and 2.0) and Ethernet Devices
5.3 Structure of CC-Link IE TSN Class B/A Devices
(Mixture of CC-Link IE TSN Protocol Version 1.0
and 2.0) and Ethernet Devices
The following diagram shows the system configuration under the conditions below:
• "Mixture of CC-Link IE TSN Class B/A or CC-Link IE TSN Class A Only" set for "Connection Device Information" under
"Basic Settings" in the engineering tool
• Master station firmware version "1.010" or later
• CC-Link IE TSN-compatible devices with the protocol versions 1.0 and 2.0
For the maximum number of connectable stations when "Connection Device Information" under "Basic Settings" of the master
station is set to "Mixture of CC-Link IE TSN Class B/A or CC-Link IE TSN Class A Only", check the following.
Page 15 Performance Specifications of CC-Link IE TSN
The following terms are used to describe the terms in the tables.
No.0: Master station
No.1, No.7: Local station
No.2, No.3, No.4, No.5, No.6: Remote station
(1), (2), (3): Ethernet device
Class A: CC-Link IE TSN Class A device
Class B: CC-Link IE TSN Class B device
No.0: Master station
No.1: Local station
No.2: Remote station
(1) Device on the master station side (The master station or a device near the
master station)
(2) Device on the end side (A device far from the master station)
No.0
Class B (1Gbps)
No.7
Class B (1Gbps)
No.1
Class B (1Gbps)
No.4
Class A (100Mbps)
(3)
(100Mbps)
(1)
(1Gbps)
(2)
(100Mbps)
No.2
Class B (1Gbps)
No.3
Class B (1Gbps)
No.5
Class A (100Mbps)
No.6
Class A (100Mbps)
Industrial switch
(for CC-Link IE TSN
Class A)
Industrial switch
(for CC-Link IE
TSN Class A)
No.0 No.1
No.2
(2)(1)
(2)(1)