18
2 SPECIFICATIONS
2.5 Part Names
2.5 Part Names
This section describes the part names of the FX5-CCLGN-MS.
No. Name Description
(1) Modular jack for P1 (RJ45)
(with cap)
A port for CC-Link IE TSN connection. Connects an Ethernet cable.
For wiring methods and wiring precautions, refer to the following.
Page 125 WIRING
(2) Modular jack for P2 (RJ45)
(with cap)
Same as the modular jack for P1 (RJ45)
(3) Extension cable A cable for connecting a module when adding the FX5-CCLGN-MS
(4) Hole for direct installation A screw hole for direct installation (2-4.5, Installation screw: M4 screw)
(5) Operation status display LEDs Indicate the operating status of the module. For details, refer to the following.
Page 19 LED indication
(6) Extension connector A connector for connecting an extension cable of an extension module
(7) Nameplate Displays product model, manufacturer serial number, power supply specifications, and MAC address.
(8) DIN rail mounting groove Used for mounting a module onto a DIN46277 (width: 35mm) DIN rail
(9) DIN rail mounting hook Used for mounting a module onto a DIN46277 (width: 35mm) DIN rail
(10) Pullout tab Used for drawing out an extension cable
(11) Power connector A connector for connecting a power cable
(2)
(1)
(10)
(3)
(4)
(8)
(7)
(9)
(6)
(11)
(5)
2-I4.5 Mounting holes
To Next Page
Loading...
