Why does my Mitsubishi Electric MELSEC iQ-F Controller show error CFF0H?
The Mitsubishi Electric Controller shows error CFF0H because an error occurred in the slave station. To solve this, check the slave station where the error occurred.
What to do if the Mitsubishi Electric Controller firewall is blocking communication?
If a firewall is set up between the FX5-ENET and the personal computer, ensure permission has been given to the port to be used.
What to do if Ethernet cables are not fully inserted in my Mitsubishi Electric MELSEC iQ-F Controller?
Ensure the Ethernet cables are fully inserted.
Why is my Mitsubishi Electric Controller unable to communicate with another BACnet device?
If your Mitsubishi Electric Controller is failing to communicate with another BACnet device, it could be due to several reasons. First, verify that the IP address and instance number of the device are not duplicated, correcting them if necessary. Also, ensure that the other BACnet device is ready to communicate. Check if the Ethernet module is running; if not, restart it. Finally, confirm that the packet is being sent to the correct destination, using an Ethernet packet monitor to verify.
General| Series | MELSEC iQ-F |
|---|---|
| Protection Class | IP20 |
| Type | Programmable Logic Controller (PLC) |
| I/O Capacity | 16 to 256 points (depending on the model) |
| Expandable I/O | Yes, via expansion modules |
| Communication | Ethernet, RS-485, CC-Link, MODBUS |
| Programming Language | Ladder Diagram (LD), Function Block Diagram (FBD), Structured Text (ST) |
| Power Supply | 24V DC or 100-240V AC |
| Program Memory Capacity | Up to 64K steps |
| I/O Points | 16 to 256 points (depending on configuration) |
| Operating Voltage | 100-240 VAC or 24 VDC (depending on model) |
| Operating Temperature | 0°C to 55°C |
| Built-in I/O | Yes, available on base units (digital I/O) |
Outlines categories of safety precautions and their meanings.
Details safety precautions for system operation, external circuits, and buffer memory.
Advises against bundling control and communication cables together.
Advises measures for system security against cyberattacks.
Details precautions for product installation and usage environment.
Provides precautions for handling conductive parts, drilling, ventilation, mounting, and wiring.
Details precautions for power supply, terminal covers, cable temperature rating, and screw terminal block wiring.
Advises on grounding methods and wiring practices to prevent damage and noise.
Warns about touching terminals, cleaning, program modification, multiple peripheral device access, and program creation.
Advises against disassembling/modifying, connecting/detaching cables, and attaching/detaching devices without power off.
Warns about interlock circuits, error handling, and sending safety-related data.
Details performance specifications related to CC-Link IE TSN, like station type and communication speed.
Details performance specifications for Ethernet communication, including speed and interface.
Instructs on connecting the Ethernet cable to the FX5-CCLGN-MS.
Guides on configuring the system and setting parameters for start-up.
Ensures security via network environment restrictions for access paths to the FX5 CPU module.
Details wiring methods for connecting and disconnecting Ethernet cables.
Provides precautions for Ethernet cable wiring, including bending radius and noise.
Allows configuring communication speed, mode, security, and other application-specific parameters.
Provides tools for parameter setting of device stations and network configuration.
Guides on checking module status via LED indications for troubleshooting.
Explains how to check module diagnostics, error information, and LED status.
Details using diagnostics tools for monitoring network status and troubleshooting.
Provides solutions for common symptoms encountered during operation.
Lists all error codes, their definitions, causes, actions, and detailed information.
To Next Page