Mitsubishi Electric MELSEC iQ-F FX5U - Connection Method B - Connection of an Expansion Adapter; Connection Method C - Connection of an Extension Module (Extension Cable Type) to the CPU Module

5 INSTALLATION
5.5 Connection Methods for CPU Module and Extension Devices
85
5
Connection method B - connection of an expansion adapter
This subsection explains how to connect the expansion adapter to the CPU module.
Connection method C - connection of an extension module
(extension cable type) to the CPU module
The procedure for connecting the extension module (extension cable type) to the CPU module or powered input/output
module is explained below.
1. Remove expansion adapter connector cover (A in the right
figure).
2. Slide the hook for coupling the expansion adapter of the
CPU module (B in the right figure).
3. Connect the expansion adapter to the CPU module as
shown in the right figure.
4. Slide the hook for coupling the expansion adapter of the
CPU module (B in the right figure) to fix the expansion
adapter (C in the right figure).
1. Remove the extension connector cover (A in the right figure)
on the right side of the surface of the CPU module or
powered input/output module.
2. Connect the extension cable (B in the right figure) from the
extension module (extension cable type) to the extension
connector of the CPU module or powered input/output
module. Put the pullout tab (C in the right figure) of the
extension cable inside the extension connector cover.
3. Fit the extension connector cover (A in the right figure).
1
A
B
2
2
B
B
4
3
3
3
4
C
C
3
1
A
B
C
CPU module