Mitsubishi Electric MELSEC iQ-R08CPU - CPU Response Monitoring Timer; MODBUS;TCP Settings

254
2 PARAMETER SETTINGS
2.3 Application Settings
MODBUS/TCP Settings
Set MODBUS/TCP.
CPU Response Monitoring Timer
Set the time for monitoring the response from the CPU module.
When the CPU module does not send a response within the set time after the reception of a request message from the
MODBUS/TCP master device, the state of waiting for the response from the Ethernet-equipped module is canceled.
Set the CPU Response Monitoring Timer within the following range.
Item Description Setting range
To Use or Not to Use MODBUS/TCP
Setting
"Use" is displayed when a MODBUS/TCP connection device is added
in "External Device Configuration" under "Basic Settings". ("To Use or
Not to Use MODBUS/TCP Setting" cannot be edited.)
•Not Use
•Use
(Default: Not Use)
CPU Response Monitoring Timer Set the time for monitoring the response from the CPU module.
(Page 254 CPU Response Monitoring Timer)

Device Assignment Set the parameters to associate the MODBUS devices with the device
memory areas of the CPU module.
(Page 255 Device Assignment)

Unit Setting range
s 1 to 16383
ms 100 to 16383000 (in increments of 100ms)