Mitsubishi Electric MELSERVO-J5 - Page 168

166
3 BASIC FUNCTION
3.16 Alarm function
*1 The model speed command is a speed command generated in the servo amplifier for forced stop deceleration of the servo motor.
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
0 r/min
0 r/min
Alarm occurrence
Model speed command is 0,
and the speed is equal to or
less than zero speed
Commands from the controller
are not accepted.
No alarm
No alarm
No alarm
Alarm No.
*1
First MR-J5D_-_G_
Base circuit
(Energy supply to the servo
motor)
Display of the first MR-J5D_-_G_
First MR-J5D_-_G_
Servo motor speed
Second MR-J5D_-_G_
Servo motor speed
First MR-J5D_-_G_
MBR
(Electromagnetic brake
interlock)
First MR-J5D_-_G_
CVST
(Converter stop)
Second MR-J5D_-_G_
Base circuit
(Energy supply to the servo
motor)
Display of the second
MR-J5D_-_G_
MR-CV display
Second MR-J5D_-_G_
MBR
(Electromagnetic brake
interlock)
Second MR-J5D_-_G_
CVST
(Converter stop)
CVST does not turn off at the end of
forced stop deceleration.
The alarm that occurred on the
other axis does not stop the motor.