EasyManua.ls Logo

Mitsubishi Electric Mr.Slim PLA-RP3AA User Manual

Mitsubishi Electric Mr.Slim PLA-RP3AA
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TECHNICAL & SERVICE MANUAL
CONTENTS
1. TECHNICAL CHANGES······························2
2.
COMBINATION OF INDOOR AND OUTDOOR UNITS
···3
3. SAFETY PRECAUTION·······························4
4. PART NAMES AND FUNCTIONS ···············8
5. SPECIFICATIONS ······································11
6. DATA ··························································23
7. OUTLINES AND DIMENSIONS ·················62
8. WIRING DIAGRAM ····································63
9. REFRIGERANT SYSTEM DIAGRAM········64
10. TROUBLESHOOTING ·······························65
11. DISASSEMBLY PROCEDURE ··················76
12. PARTS LIST ···············································79
13. OPTIONAL PARTS ····································86
Indoor unit
[Model names] [Service Ref.]
PLA-RP1.6AA PLA-RP1.6AA
PLA-RP2AA PLA-RP2AA
PLA-RP2.5AA PLA-RP2.5AA
PLA-RP3AA PLA-RP3AA
PLA-RP3AA1
PLA-RP4AA PLA-RP4AA
PLA-RP4AA1
PLA-RP5AA PLA-RP5AA
PLA-RP5AA1
PLA-RP6AA PLA-RP6AA
PLA-RP6AA1
No.OC293
REVISED EDITION-B
• PLA-RP1.6AA, PLA-RP2AA
and PLA-RP2.5AA are added in
REVISED EDITION-B.
This manual does not cover outdoor
units.
When serving them, please refer to
the service manual No.OC294
REVISED EDITION-B, OC285
REVISED EDITION-A, OC298 and
this manual in a set.
INDOOR UNIT
Ceiling Cassettes
Series PLA
WIRED REMOTE
CONTROLLER
R407C/R410A
WIRELESS REMOTE
CONTROLLER
ON/OFF TEMP
MODEL SELECT
NOT AVAILABLE
CHECK
TEST RUN
˚C
AMPM
AMPM
ON/OFF
CENTRALLY CONTROLLED
ERROR CODE
CLOCK
ON OFF
˚C
CHECK
CHECK MODE
FILTER
TEST RUN
FUNCTION
˚C
1Hr.
NOT AVAILABLE
STAND BY
DEFROST
TEMP.
SPLIT-TYPE, HEAT PUMP AIR CONDITIONERS
SPLIT-TYPE, AIR CONDITIONERS
Please void OC293 REVISED
EDITION-A.
2004
Model name
indication
OC293-B-1.qxp 04.9.29 4:09 PM Page 1

Other manuals for Mitsubishi Electric Mr.Slim PLA-RP3AA

Questions and Answers:

Mitsubishi Electric Mr.Slim PLA-RP3AA Specifications

General IconGeneral
BrandMitsubishi Electric
ModelMr.Slim PLA-RP3AA
CategoryAir Conditioner
LanguageEnglish

Summary

Mitsubishi Electric Technical & Service Manual

Technical Changes

Technical Changes: Revised Edition-A

Details changes for specific models in Revised Edition-A.

Technical Changes: Revised Edition-B

Notes models added in Revised Edition-B.

Indoor and Outdoor Unit Combinations

Unit Combinations: R410A Inverter (PUHZ-RP)

Shows compatible indoor and outdoor units for R410A inverter systems.

Unit Combinations: R407C Fixed Speed (PUH-P)

Shows compatible indoor and outdoor units for R407C fixed speed systems.

Unit Combinations: Cooling Only (PU-P)

Shows compatible indoor and outdoor units for cooling only systems.

Safety Precautions

Safety: R407C Refrigerant Handling

Specific safety instructions for units using R407C refrigerant.

Safety: Service and Recharging Cautions

General service guidelines and refrigerant recharging procedures.

Safety: Service Tools for R407C

Safety: R410A Refrigerant Handling

Safety: R410A Service and Recharging

Service procedures and refrigerant charging for R410A.

Safety: Service Tools for R410A

Part Names and Functions

Part Names: Indoor Unit Components

Identifies and describes parts of the indoor unit.

Part Names: Wired Remote Controller Buttons

Explains the functions of various buttons on the wired remote controller.

Part Names: Remote Controller Display

Part Names: Wireless Remote Controller

Specifications

Specifications: Heat Pump Type (1) Models

Technical specifications for heat pump type (1) series.

Specifications: PLA-RP1.6AA & PLA-RP2AA

Technical specifications for PLA-RP1.6AA and PLA-RP2AA models.

Specifications: PLA-RP2.5AA

Specifications: PLA-RP3AA / PLA-RP3AA1

Technical specifications for PLA-RP3AA and PLA-RP3AA1 models.

Specifications: PLA-RP4AA / PLA-RP4AA1

Specifications: PLA-RP5AA / PLA-RP5AA1

Technical specifications for PLA-RP5AA and PLA-RP5AA1 models.

Specifications: PLA-RP6AA / PLA-RP6AA1

Specifications: Heat Pump Type (2) - PLA-RP1.6AA

Specifications: Heat Pump Type (2) - PLA-RP2AA

Technical specs for PLA-RP2AA as heat pump type (2).

Specifications: Heat Pump Type (2) - PLA-RP3AA / PLA-RP3AA1

Specifications: Heat Pump Type (2) - PLA-RP4AA / PLA-RP4AA1

Specifications: Heat Pump Type (2) - PLA-RP5AA / PLA-RP5AA1

Technical specs for PLA-RP5AA and PLA-RP5AA1 as heat pump type (2).

Specifications: Heat Pump Type (2) - PLA-RP6AA / PLA-RP6AA1

Specifications: Cooling Only Type (3) - PLA-RP1.6AA

Specifications: Cooling Only Type (3) - PLA-RP2AA

Technical specs for PLA-RP2AA as cooling only type (3).

Specifications: Electrical Parts

Data and Performance

Data: Cooling Capacity Performance

Presents cooling capacity data for various operating conditions.

Data: Heating Capacity Performance

Presents heating capacity data for various operating conditions.

Data: Performance Curves

Graphical representation of cooling and heating performance curves.

Data: Correction Factors

Correction factors for refrigerant piping length.

Data: Standard Operation Data

Standard operational data for heat pump types.

Outlines and Dimensions

Dimensions: Unit Specifications

Provides overall dimensions and pipe connection details.

Wiring Diagram

Wiring Diagram: Indoor Unit

Illustrates the electrical connections within the indoor unit.

Wiring Diagram: DIP Switch Settings

Explains the function of DIP switches SW1 and SW2.

Refrigerant System Diagram

Refrigerant System: Flow Paths

Diagrams showing refrigerant flow during cooling and heating operations.

Troubleshooting

Troubleshooting: Recurring Phenomena

Actions for when an inferior phenomenon is reoccurring.

Troubleshooting: Non-Recurring Phenomena

Actions for when an inferior phenomenon is not reoccurring.

Troubleshooting: Self-Diagnosis Actions

Troubleshooting: Room Temperature Thermistor (P1)

Diagnosing and resolving issues with the room temperature thermistor.

Troubleshooting: Pipe Temperature Thermistor (P2)

Diagnosing and resolving issues with the pipe temperature thermistor.

Troubleshooting: Drain Sensor Abnormality (P4)

Troubleshooting drain sensor abnormalities.

Troubleshooting: Drain Pump Malfunction (P5)

Diagnosing and resolving drain pump malfunctions.

Troubleshooting: Freezing/Overheating Protection (P6)

Troubleshooting: Pipe Temperature Abnormality (P8)

Diagnosing pipe temperature abnormalities in cooling and heating modes.

Troubleshooting: Condenser/Evaporator Thermistor (P9)

Troubleshooting: Remote Signal Error (E4)

Resolving issues with remote controller signal reception.

Troubleshooting: Remote Transmission Error (E5)

Resolving issues with remote controller signal transmission.

Troubleshooting: Indoor/Outdoor Comms Error (E6)

Troubleshooting indoor/outdoor unit communication signal errors.

Troubleshooting: Indoor/Outdoor Comms Error (E7)

Troubleshooting indoor/outdoor unit communication transmitting errors.

Troubleshooting: LED2 Off on Indoor Board

Troubleshooting: LED2 Blinking on Indoor Board

Diagnosing causes for LED2 blinking on the indoor controller board.

Troubleshooting: Vane Performance Failure

Addressing issues with upward/downward vane operation.

Emergency Operation: Remote Controller Issues

Emergency Operation: Wired Controller Issues

Using emergency operation when wired controller or unit is faulty.

Disassembly Procedures

Disassembly: Air Intake Grille Removal

Steps to remove the air intake grille from the indoor unit.

Disassembly: Fan Guard Removal

Steps to remove the fan guard from the indoor unit.

Disassembly: Room Temperature Thermistor Removal

Steps to remove the room temperature thermistor.

Disassembly: Electrical Box Removal

Steps to remove the electrical box containing key components.

Disassembly: Fan Motor Removal

Disassembly: Thermistor and Service Panel Removal

Steps to remove pipe thermistor, service panel, and related parts.

Disassembly: Panel Removal

Steps to remove various panels for access.

Disassembly: Drain Pan Removal

Steps to remove the drain pan.

Disassembly: Drain Pump and Sensor Removal

Disassembly: Heat Exchanger Removal

Steps to remove the heat exchanger assembly.

Parts List

Parts List: Panel Parts (PLP-6AA)

List of panel parts for the PLP-6AA.

Parts List: Functional Parts (RP1.6AA-RP2.5AA)

Lists functional and structure parts for RP1.6AA to RP2.5AA.

Parts List: Functional Parts (RP3AA-RP4AA)

Lists functional and structure parts for RP3AA and RP4AA models.

Parts List: Functional Parts (RP5AA-RP6AA)

Lists functional and structure parts for RP5AA and RP6AA models.

Optional Parts

Optional Parts: Program Timer

Details the PAC-YT32PTA program timer, its functions, and settings.

Optional Parts: Multi Function Casement

Information on the multi-function casement and filter element.

Optional Parts: Grille and Remote Controllers

Lists grilles, wireless and wired remote controllers.

Optional Parts: Sensors and Adapters

Lists remote sensors, adapters, and shutter plates.

Related product manuals