To Next PageTo Next PageWhat to do if my Mitsubishi Electric MSZ-AP22VGD fails to connect to the router?
If your Mitsubishi Electric Air Conditioner fails to connect to the Router and is starting up the indoor unit connection, check the DHCP Settings of the Router, or check IP address settings of the Wi-Fi interface.
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.2 kW |
| Heating Capacity | 2.5 kW |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Indoor Unit Dimensions (W x H x D) | 798 x 299 x 219 mm |
| Annual Energy Consumption (Cooling) | 215 kWh |
| Annual Energy Consumption (Heating) | 350 kWh |
| Noise Level (Indoor) | 19 dB |
| Noise Level (Outdoor) | 48 dB |
Explains symbols used on the unit and in the manual for safety.
Details warning and caution marks indicating potential hazards.
Safety guidelines and precautions for installing the air conditioner unit.
Safety instructions for handling and using the Wi-Fi interface.
Guide to connecting via Access Point Mode pairing.
Instructions for connecting using WPS-Push pairing.
Common Wi-Fi connection issues and their solutions.
Solutions for common symptoms related to the indoor unit.
Troubleshooting steps for remote controller malfunctions.
Addressing insufficient cooling, heating, or airflow issues.
Places to avoid for installation to ensure proper function.
Guidelines for safe and proper electrical connections.
