To Next PageTo Next PageWhat to do if my Mitsubishi Electric MSZ-AP25VGD fails to connect to the router?
If your Mitsubishi Electric Air Conditioner fails to connect to the Router and is starting up the indoor unit connection, check the DHCP Settings of the Router, or check IP address settings of the Wi-Fi interface.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Refrigerant | R32 |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A++ |
| Power Supply | 220-240 V, 50 Hz |
| Type | Split System |
| Indoor Unit Noise Level | 19 dB(A) |
Explains symbols displayed on units and used in the manual for safety.
Provides crucial warnings and cautions for safe operation and handling of the unit.
Safety guidelines for installing the air conditioner, including power supply and earthing.
Safety precautions for handling and using the Wi-Fi interface.
Introduction to the Wi-Fi interface and its basic functions.
Step-by-step guide for setting up Access Point Mode.
Troubleshooting common problems related to indoor and outdoor units.
Addresses issues with the remote controller and general operation problems.
Guides on diagnosing unusual sounds and timer malfunctions.
