To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric MSZ-AY35VGK-ER1 and is the answer not in the manual?
General| Type | Wall Mounted |
|---|---|
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240 V, 50 Hz |
| Outdoor Unit Dimensions (W x H x D) | 800 x 550 x 285 mm |
| Weight (Indoor Unit) | 9.5 kg |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Refrigerant | R32 |
| Outdoor Unit Noise Level | 49 dB(A) |
| Coefficient of Performance (COP) | 4.00 |
| Indoor Unit Noise Level | 19 dB (Low) |
Details for shortening timer settings and pairing remote controllers to specific units.
Step-by-step guide to connecting the Wi-Fi interface using WPS Push mode.
Instructions for setting up the Wi-Fi interface using Access Point mode.
Procedure to adjust room temperature sensor correction via remote controller.
Guide to setting up daily and weekly timers for automatic operation.
Procedures for using the emergency operation switch for testing and servicing.
Instructions for setting ON and OFF timers, including program timer combinations.
Essential safety precautions and checks before starting troubleshooting.
Steps for diagnosing issues using the operation indicator and replacing remote batteries.
How to recall and interpret fault codes indicated by the indoor unit's operation lamp.
Procedure to recall and check for faults related to the air purifying device.
Table detailing abnormal points, conditions, and remedies for indoor unit errors.
Diagnostic flow for unit operation issues, including indicator lamp checks.
Troubleshooting steps for Wi-Fi connectivity issues with the air conditioner.
Detailed table of abnormalities, symptoms, conditions, and remedies for unit operation.
Diagnostic flowchart for issues related to the indoor fan motor operation.
Procedure to check remote controller functionality and the indoor electronic P.C. board.
Steps to check the indoor electronic P.C. board and fan motor for faults.
Diagnostic steps for miswiring and serial signal errors in MUZ type units.
Diagnostic steps for miswiring and serial signal errors in MXZ type units.
Procedure to check the air purifying power function and its associated faults.
Table for identifying and resolving air purifying power related faults.
Criteria for checking main components like thermistors, fan motors, and vane motors.
Procedure for removing the Wi-Fi interface, electrical cover, and connectors.
Steps to remove the indoor electrical box, wires, and the air purifying device.
