To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric MSZ-FS06NA and is the answer not in the manual?
General| Cooling Capacity | 6, 000 BTU/h |
|---|---|
| Refrigerant | R32 |
| Sound Level (dB(A)) | 19 dB(A) (Indoor, Quiet Mode) |
| Operating Temperature (Cooling) | 14°F to 115°F |
| Noise Level (Indoor Unit) | 19 dB (low), 42 dB (high) |
| Noise Level (Outdoor Unit) | 46 dB (low), 55 dB (high) |
Explains warning and caution symbols used in the manual.
Defines symbols for instructions like 'do not', 'follow', 'danger', etc.
Identifies parts of the indoor air conditioner unit.
Details the buttons and display of the remote control.
Identifies parts of the outdoor air conditioner unit.
Step-by-step guide for inserting batteries into the remote controller.
Instructions for setting the current time and changing temperature units (°F/°C).
How to configure the remote controller for the unit's installation location.
Automatically saves energy when the room is empty.
Fine-tuned operation by locating occupants for airflow direction.
Controls room temperature based on sensible temperature detected by the i-see sensor.
Unit automatically selects mode (COOL/HEAT) based on room temperature.
Explains how to select and use Cool, Dry, Heat, and Fan operating modes.
Explains the meaning of the unit's indicator lights during operation.
How to adjust vertical airflow direction using the remote controller.
Guide to selecting fan speed from Quiet to Super High.
How to adjust horizontal airflow direction using the WIDE VANE button.
Enables recalling preferred settings with a single button press.
Provides cooling comfort with energy savings via swing airflow.
Mimics a natural breeze for reduced discomfort from direct airflow.
Provides maximum cooling or heating output for a short period.
Allows setting specific times for the unit to turn on or off.
Guide to programming daily ON/OFF times and temperatures for a week.
How to view programmed weekly timer settings.
Instructions for cleaning Nano platinum, air cleaning, and deodorizing filters.
Steps to remove and clean the indoor unit's front panel.
How to operate the unit using the emergency switch when the remote is unavailable.
Unit automatically resumes operation after a power interruption.
Explains and checks for common problems with the indoor unit.
Explains and checks for common problems with the outdoor unit.
Explains and checks for common problems with the remote controller.
Steps to prepare the unit for long periods of non-use.
Steps to follow when resuming operation after storage.
Avoids locations that can cause problems or malfunction.
Guidelines for proper electrical hookup and safety.
Specifies the operational temperature and humidity limits.
Information for product registration and warranty in the USA.
Information for product registration and warranty in Canada.
