To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric MSZ-FS18NA and is the answer not in the manual?
General| Series | MSZ-FS |
|---|---|
| Cooling Capacity | 18, 000 BTU/h |
| Heating Capacity | 20, 000 BTU/h |
| Energy Efficiency Ratio (EER) | 11.5 |
| Voltage | 208/230V |
| Indoor Unit Dimensions (H x W x D) | 12.5 x 32.5 x 8.5 inches |
| Outdoor Unit Dimensions (H x W x D) | 28.5 x 34 x 12 inches |
| Operating Temperature (Cooling) | 14°F to 115°F |
| Heating Capacity (BTU) | 20, 000 |
| Power Supply | 1-Phase |
| Refrigerant | R410A |
Covers critical safety instructions regarding power connection, cord handling, and direct airflow exposure.
Provides key recommendations on filter cleaning and pre-operation checks for safe operation.
Details critical safety measures for installation, including power supply, grounding, and drainage.
Enables energy-saving operation automatically when the room is unoccupied.
Offers finely-tuned operation by locating occupants and adjusting airflow direction.
Controls room temperature based on sensible temperature detected by the i-see sensor.
Diagnoses common issues related to the indoor unit's operation and performance.
Diagnoses common issues related to the outdoor unit's operation and performance.
Addresses issues with the remote controller display or response.
Covers troubleshooting for cooling/heating, airflow, sound, and timer irregularities.
