INSTALLATION MANUAL
FOR INSTALLER
CONTENTS
1. BEFORE INSTALLATION ..............................................................................2
2. OUTDOOR UNIT INSTALLATION .................................................................4
3. FLARING WORK AND PIPE CONNECTION .................................................5
4. PURGING PROCEDURES, LEAK TEST, AND TEST RUN ...........................5
5. RELOCATION AND MAINTENANCE ............................................................7
Split-type Air-Conditioner
MXZ-2B52VA
• Refer to the installation manual of each indoor unit for indoor
unit installation.
English
IMPORTANT NOTES
TO COMPLY WITH THE REQUIREMENTS OF AUSTRALIAN STANDARD
AS/NZS 3000 ELECTRICAL INSTALLATIONS (Wiring Rules),
THE ELECTRICAL WIRING REQUIRED BETWEEN THE INDOOR AND
OUTDOOR UNITS MUST BE INSTALLED BY A LICENCED ELECTRICAL
CONTRACTOR.
To Next Page
Need help?
General
