To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric MXZ-3C24NA and is the answer not in the manual?
General| Series | MXZ |
|---|---|
| Refrigerant | R410A |
| Indoor Units Supported | Up to 3 |
| Number of Zones | 3 |
| Compressor Type | Inverter |
| Outdoor Unit Noise Level | 49 dB(A) |
| Cooling Capacity | 24000 BTU/h |
| Heating Capacity | 27, 000 BTU/h |
| Power Supply | 208/230V, 1-phase, 60Hz |
| Indoor Unit Noise Level | Varies by indoor unit |
| Indoor Unit Dimensions (HxWxD) | Varies by indoor unit |
| Indoor Unit Weight | Varies by indoor unit |
| Type | Multi-Zone Heat Pump |
Essential safety rules to follow before and during repair services for user safety.
Specific safety guidelines for handling R410A refrigerant and associated piping work.
Guidelines for refrigerant pipe length and diameter selection for multi-system configurations.
Specifies operational limits for cooling and heating based on indoor and outdoor conditions.
Charts showing capacity and input correction factors based on operating conditions.
Graphs illustrating capacity and input adjustments based on inverter output frequency.
Performance curves showing outdoor low pressure and unit current vs. ambient temperature.
Manages compressor protection against moisture and refrigerant liquefaction.
Function for automatic detection and correction of wiring or piping errors.
Instructions for adjusting the refrigerant evaporating temperature setting.
Essential safety precautions and checks before starting troubleshooting procedures.
How to recall and interpret stored failure codes indicated by LED lights.
Flowchart and guide for diagnosing and resolving common operational issues.
Detailed table mapping LED indications to abnormal points, conditions, and remedies.
Diagram and voltage specifications for the outdoor control printed circuit board.
Diagram and voltage specifications for the outdoor power printed circuit board.
Step-by-step guide for safely removing external panels and the cabinet.
Procedure for disassembling internal electronic components and the reactor.
Instructions for removing the outdoor unit's fan motor.
Steps for safely removing the compressor and the 4-way refrigerant valve.
Procedure for removing the expansion valve from the refrigerant circuit.
Guidance on accessing the service port for maintenance.
