To Next PageTo Next PageWhat to do if the Mitsubishi Electric MXZ-5D102VA detects high pressure with the high-pressure switch (HPS) during operation?
If the high-pressure switch detects high pressure during operation, check the refrigerant circuit and the refrigerant amount. Also, check the stop valve.
What should I do if the fin temperature exceeds 90 ºC during operation of my Mitsubishi Electric MXZ-5D102VA?
If the fin temperature exceeds 90 ºC during operation, check around the outdoor unit and the outdoor unit air passage.
What to do if the discharge temperature exceeds 116 ºC during operation of Mitsubishi Electric MXZ-5D102VA?
If the discharge temperature exceeds 116 ºC during operation, check the refrigerant circuit and the refrigerant amount.
What to do if the sensor circuit of current of compressor shorts or opens during compressor operate of Mitsubishi Electric Air Conditioner?
If the sensor circuit of current of compressor shorts or opens during compressor operation, replace the inverter P.C. board.
What to do if Mitsubishi Electric MXZ-5D102VA Air Conditioner nonvolatile memory data cannot be read properly?
If the nonvolatile memory data cannot be read properly, replace the inverter P.C. board.
General| Series | MXZ |
|---|---|
| Cooling Capacity | 10.2 kW |
| Refrigerant | R410A |
| Power Supply | 220-240 V, 50 Hz |
| Number of Connectable Indoor Units | 5 |
| Voltage | 220-240 V |
| Energy Efficiency Ratio (EER) | 3.52 |
| Sound Level (Outdoor) dB(A) | 54 dB(A) |
| Energy Efficiency Ratio (Cooling) | 3.52 |
| Outdoor Unit Noise Level | 54 dB(A) |
| SEER | 6.9 |
| Indoor Unit Dimensions (WxHxD) | Varies by model |
| Indoor Unit Weight | Varies by model |
Technical specifications for various outdoor unit models, including power, current, and capacity.
Wiring diagrams for MXZ-2D series outdoor units.
Wiring diagrams for MXZ-3D series outdoor units.
Wiring diagrams for MXZ-4D series outdoor units.
Presents capacity and input data based on indoor intake and outdoor air conditions.
Shows how capacity and input change with inverter frequency for single operation.
Procedure for performing fixed-frequency operation test run.
Curves showing outdoor low pressure and current based on ambient conditions.
General precautions to follow before and during troubleshooting.
Explains how the air conditioner memorizes and recalls abnormal conditions.
Table detailing symptoms, LED indications, conditions, remedies, and failure mode recall function.
