Need help?Do you have a question about the Mitsubishi Electric PEA-M200LA and is the answer not in the manual?
General| Brand | Mitsubishi Electric |
|---|---|
| Model | PEA-M200LA |
| Category | Air Conditioner |
| Language | English |
Key safety guidelines for handling new refrigerants like R32/R410A.
Critical warnings and precautions for personnel performing service on the unit.
Specific precautions to be followed during maintenance and repair operations.
Procedures and precautions for charging refrigerant into the system.
Detailed safety considerations for operating units with R32 refrigerant.
Identification and illustration of the indoor unit components.
Details on the functions and operations of the optional wired remote controller.
Explanation of operation buttons and battery installation for the wireless remote controller.
Technical specifications for the PEA-M200LA indoor unit model.
Technical specifications for the PEA-M250LA indoor unit model.
Performance charts showing airflow rate vs. external static pressure for PEA-M200LA.
Performance charts showing airflow rate vs. external static pressure for PEA-M250LA.
Description and diagram of the sound pressure level measurement setup.
Noise level curves (NC curves) for PEA-M200LA under various conditions.
Noise level curves (NC curves) for PEA-M250LA under various conditions.
Detailed dimensions and connection points for the indoor unit.
Requirements for adequate space to perform maintenance and inspection.
Detailed wiring diagram for the indoor controller board.
Diagram showing refrigerant flow and thermistor positions in the system.
Important safety guidelines to follow before and during troubleshooting.
How to access and use the unit's self-check diagnostic feature.
Detailed descriptions and causes for various error codes.
Diagram identifying test points on the indoor controller board for diagnostics.
Criteria for diagnosing issues with temperature thermistors.
Procedure for checking and diagnosing the DC fan motor.
Explanation of functions controlled by dip switches and jumper wires.
Steps for removing and accessing the control box.
Procedure for removing and replacing thermistors.
Instructions for removing the drain pan for cleaning or replacement.
Steps for accessing and removing the heat exchanger.
Procedures for disassembling the fan motor and its case.
Setting up functions and addresses for the wired remote controller.
Table detailing unit number settings for various functions.
Settings for filter sign and external static pressure configuration.
List of available optional parts and their model numbers.
To Next Page