EasyManua.ls Logo

Mitsubishi Electric PEAD-A09AA8 User Manual

Mitsubishi Electric PEAD-A09AA8
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Air-Conditioners
PEAD-A09,12,15,18,24,30,36AA8
English
INSTALLATION MANUAL
For safe and correct use, please read this installation manual thoroughly before installing the air-conditioner unit.
FOR INSTALLER
Français
MANUEL D’INSTALLATION
Veuillez lire le manuel d’installation en entier avant d’installer ce climatiseur pour éviter tout accident et vous
assurer d’une utilisation correcte.
POUR L’INSTALLATEUR
Español
MANUAL DE INSTALACIÓN
Para un uso seguro y correcto, lea detalladamente este manual de instalación antes de montar la unidad de aire
acondicionado.
PARA EL INSTALADOR
KJ79P806H01.book 1 ペー 021年12月13日 月曜日 午後2時15分
Question and Answer IconNeed help?

Do you have a question about the Mitsubishi Electric PEAD-A09AA8 and is the answer not in the manual?

Mitsubishi Electric PEAD-A09AA8 Specifications

General IconGeneral
BrandMitsubishi Electric
ModelPEAD-A09AA8
CategoryAir Conditioner
LanguageEnglish

Summary

Installation Manual Overview

Manual Purpose and Language Options

Details the manual's scope and provides language selection options.

Safety Precautions and Symbols

General Safety Guidelines

Essential safety warnings and cautions for installation and operation.

Unit and Manual Symbols

Explanation of symbols used on the unit and within the manual.

Installation Location and Site Selection

Unit Placement and Site Requirements

Guidelines for selecting indoor/outdoor unit locations and site suitability.

Installation Space and Hanging Bolts

Securing adequate service space and installing hanging bolts correctly.

Unit Installation and Piping Preparation

Hanging the Indoor Unit

Steps for lifting and mounting the indoor unit using hanging bolts.

Refrigerant Pipe Preparation

Covers pipe cutting, burr removal, nut fitting, and flaring techniques.

Refrigerant Piping and Drain Work

Pipe Connection and Leak Testing

Procedures for connecting pipes, leak testing, and purging.

Drain Piping Installation

Guidelines for installing the drain piping correctly.

Duct Work and Drain Checks

Duct Connection and Filter Placement

Connecting canvas ducts and adjusting air filter position.

Drain Discharge Confirmation

Ensuring normal drain operation and checking for water leaks.

Electrical Wiring and Connections

Power Supply and Unit Wiring

Details on power supply patterns and indoor/outdoor wire connections.

Remote Controller Setup

Installation and setup guidelines for wired and IR wireless controllers.

Function Settings Configuration

Unit Function Settings via Controller

Setting unit functions like static pressure and power voltage via remote controller.

Test Run Procedures

Pre-Test Run Checks

Performing insulation resistance checks and other pre-operation steps.

Test Run Operation

Wired Remote Controller Test Run

Step-by-step guide for performing test run using the wired remote controller.

Test Run and Maintenance Functions

Self-Check and Auto Restart

Performing self-checks, interpreting error codes, and configuring auto restart.

Easy Maintenance Data Display

Accessing and viewing maintenance data like temperatures and currents.

Maintenance Operations

Refrigerant Gas Charging

Procedures and precautions for charging refrigerant into the system.

Related product manuals