To Next PageTo Next PageHow to fix Mitsubishi Electric Air Conditioner remote controller when indicators do not light up?
If the indicators on your Mitsubishi Electric Air Conditioner remote controller don't light up, ensure that the power switch is turned on. When the power is on, the symbol “ ” should be displayed.
What to do if error code appears on Mitsubishi Electric PEAD-RP5EA remote controller?
If an error code is displayed on your Mitsubishi Electric Air Conditioner's remote controller and the receiver's operating display is flashing, the unit is performing a self-diagnostic function to maintain the air conditioner. Do not attempt to make repairs yourself. Turn the main switch off and contact the dealer from whom you bought the air conditioner. Provide them with the unit's name and the information displayed on the remote controller.
Why start and stop functions of Mitsubishi Electric Air Conditioner are not available after restarting?
If the start and stop functions are unavailable immediately after restarting your Mitsubishi Electric Air Conditioner, wait approximately three minutes. The unit has stopped to prevent damage.
Why Mitsubishi Electric PEAD-RP5EA Air Conditioner stops before reaching set temperature in heating mode?
If the unit stops operating before reaching the set temperature in heating mode, especially when the outdoor temperature is low and humidity is high, it's likely due to frost forming. Wait about 10 minutes to allow the frost to melt.
What does “H0” mean on my Mitsubishi Electric Air Conditioner remote controller?
If “H0” is displayed on the Mitsubishi Electric Air Conditioner remote controller, the unit is performing an automatic startup test, which will last about three minutes.
Why is white mist coming from my Mitsubishi Electric PEAD-RP5EA indoor unit?
This may occur just after the unit is turned on when a high level of humidity is present in the room.
What does 'CENTRALLY CONTROLLED' mean on my Mitsubishi Electric Air Conditioner remote controller?
The start and stop functions of the remote controller are not available when the CENTRALLY CONTROLLED message is lit.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | PEAD-RP5EA |
| Category | Air Conditioner |
| Language | English |
Explains symbols used within the operation manual's text.
Explains symbols found within the manual's illustrations.
Crucial safety advice to prevent injury or death to the user.
Instructions for the proper disposal of the air conditioner unit.
Details on buttons and display elements of the remote control.
Important steps and considerations before operating the unit.
Procedure for turning the air conditioner unit on and off.
Guide to selecting different operating modes like cool, dry, fan.
Instructions for setting the desired room temperature.
Steps to adjust the fan speed for airflow.
Guide to setting the timer for operation start and stop.
Covers additional operational features and settings.
General guidelines for maintaining and cleaning the unit.
Detailed steps for removing and cleaning air filters.
Important warnings and cautions related to cleaning procedures.
Solutions for common problems encountered with the unit.
Specifies the temperature and humidity ranges for operation.
Identifies normal operational sounds or messages that are not faults.
