Mitsubishi Electric PEAD-RP4GA User Manual (English)

Other manuals for Mitsubishi Electric PEAD-RP4GA

Questions and Answers:

A
Adam HoAug 18, 2025
Why is my Mitsubishi Electric PEAD-RP4GA not cooling or heating enough?
- S
  Steven SmithAug 18, 2025
  Several factors could be at play. First, verify that the set temperature on the remote controller is appropriate: for cooling, the set temperature should be lower than the room temperature, and for heating, it should be higher. Also, inspect the air filters to ensure they are clean and not clogged, as clogged filters reduce airflow and unit capacity. Finally, check for obstructions around the indoor and outdoor units that might be blocking airflow.
S
Sara BartlettAug 20, 2025
How to fix Mitsubishi Electric Air Conditioner remote controller when indicators do not light up?
- M
  Megan GreenAug 21, 2025
  If the indicators on your Mitsubishi Electric Air Conditioner remote controller don't light up, ensure that the power switch is turned on. When the power is on, the symbol “ ” should be displayed.
A
ashley12Aug 23, 2025
How to clear the FILTER display on my Mitsubishi Electric PEAD-RP4GA Air Conditioner?
- R
  Roy SnyderAug 23, 2025
  The “FILTER” display indicates that it’s time to clean the air filters. After cleaning the filters, press the FILTER button on the remote controller twice to clear the message from the display.
K
kevinruizAug 26, 2025
What to do if error code appears on Mitsubishi Electric Air Conditioner remote controller?
- J
  Jacqueline BanksAug 26, 2025
  If an error code is displayed on your Mitsubishi Electric Air Conditioner's remote controller and the receiver's operating display is flashing, the unit is performing a self-diagnostic function to maintain the air conditioner. Do not attempt to make repairs yourself. Turn the main switch off and contact the dealer from whom you bought the air conditioner. Provide them with the unit's name and the information displayed on the remote controller.
D
David AndersonAug 28, 2025
What to do if my Mitsubishi Electric PEAD-RP4GA Air Conditioner unit does not operate at all?
- T
  tiffanymccormickAug 28, 2025
  First, make sure the air conditioner is receiving power, as nothing will appear on the display if it isn't. If power is supplied, wait approximately 3 minutes before attempting to restart the unit. The air conditioner may be in a protected state managed by its microcomputer, which prevents immediate restarts after the compressor has stopped.
N
Nicholas LiAug 30, 2025
Why does my Mitsubishi Electric Air Conditioner start on its own?
- A
  Aaron WhiteAug 30, 2025
  There are a few potential reasons for this. Check if you have set the ON timer, as the air conditioner will start at the designated time if the timer is active. Also, verify whether the unit is being controlled by a distant control system or a central remote controller; “CENTRALLY CONTROLLED” will be displayed on the remote controller if this is the case. Lastly, the unit may automatically restart after a power failure.
P
parnoldSep 1, 2025
Why does my Mitsubishi Electric PEAD-RP4GA Air Conditioner stop by itself?
- J
  James SotoSep 1, 2025
  This could be due to a few reasons. Check if the OFF timer is set, as the air conditioner will stop at the designated time if the timer is active. Also, verify whether the unit is being controlled by a distant control system or a central remote controller; if it is, “CENTRALLY CONTROLLED” will be displayed on the remote controller.
S
stephenfoxSep 3, 2025
What does 'H0' on my Mitsubishi Electric PEAD-RP4GA Air Conditioner mean?
- E
  Ernest SchmidtSep 4, 2025
  The “H0” displayed on the screen indicates that an automatic startup test is being conducted. This test runs for approximately 2 minutes when power is initially supplied to the air conditioner. The “H0” display will disappear once the test is complete.
D
Derek FigueroaSep 6, 2025
Why start and stop functions of Mitsubishi Electric PEAD-RP4GA are not available after restarting?
- N
  Nicole SanchezSep 6, 2025
  If the start and stop functions are unavailable immediately after restarting your Mitsubishi Electric Air Conditioner, wait approximately three minutes. The unit has stopped to prevent damage.
L
Linda WhiteSep 8, 2025
Why Mitsubishi Electric PEAD-RP4GA Air Conditioner stops before reaching set temperature in heating mode?
- Z
  zblankenshipSep 8, 2025
  If the unit stops operating before reaching the set temperature in heating mode, especially when the outdoor temperature is low and humidity is high, it's likely due to frost forming. Wait about 10 minutes to allow the frost to melt.

Mitsubishi Electric PEAD-RP4GA Specifications

General

Model	PEAD-RP4GA
Brand	Mitsubishi Electric
Heating Capacity	5.0 kW
Heating Capacity (kW)	5.0
Power Supply	220-240V, 50Hz
Outdoor Unit Dimensions (HxWxD)	550 x 765 x 285 mm