Mitsubishi Electric PEAD-RP35 User Manual (English)

Questions and Answers:

J
Jocelyn AllenAug 21, 2025
Why is my Mitsubishi Electric PEAD-RP35 not cooling or heating well?
- B
  Brianna WilliamsAug 21, 2025
  Your Mitsubishi Electric Air Conditioner might not be heating or cooling well due to several reasons. The airflow could be reduced because the filter is dirty or clogged, so cleaning the filter might help. Ensure the temperature settings are appropriately adjusted. Also, make sure there is enough space around the outdoor unit and that the indoor unit's air intake or outlet isn't blocked. Lastly, check if any doors or windows are open.
J
jcrosbyAug 22, 2025
What to do if Mitsubishi Electric PEAD-RP35 Air Conditioner operates without pressing the ON/OFF button?
- A
  Ashley WilsonAug 23, 2025
  If your Mitsubishi Electric Air Conditioner starts on its own, check if the on timer is set and, if so, press the ON/OFF button to stop the operation. Also, determine if the air conditioner is connected to a central remote controller, and if so, consult the relevant personnel. Check the remote controller display for the symbol “ ”. If it appears, consult the people who control the air conditioner. Finally, verify if the auto recovery feature from power failures has been enabled; if it has, press the ON/OFF button to halt operation.
C
Courtney MartinezAug 25, 2025
What to do if my Mitsubishi Electric PEAD-RP35 Air Conditioner stops without pressing the ON/OFF button?
- B
  Bryan MedinaAug 25, 2025
  If your Mitsubishi Electric Air Conditioner stops unexpectedly, first check if the off timer is set and, if it is, press the ON/OFF button to restart the operation. Also, determine if the air conditioner is connected to a central remote controller, and if so, consult the concerned people who control the air conditioner. Finally, check the remote controller display for the symbol “ ”. If it appears, consult the people who control the air conditioner.
T
Tonya SandersAug 26, 2025
What to do if a Mitsubishi Electric PEAD-RP35 error code appears in the remote controller display?
- M
  Mark EllisAug 27, 2025
  If an error code appears on your Mitsubishi Electric Air Conditioner's remote controller, it indicates that the protection devices have been activated to safeguard the unit. Immediately turn off the power switch and seek assistance from your dealer. Provide the dealer with the model name and the information displayed on the remote controller.
T
Todd GutierrezAug 27, 2025
Why does my Mitsubishi Electric PEAD-RP35 Air Conditioner emit water or vapor from the outdoor unit?
- D
  Daniel MitchellAug 28, 2025
  During cooling mode, water may form and drip from the cool pipes and joints of your Mitsubishi Electric Air Conditioner's outdoor unit. During heating mode, water may form and drip from the heat exchanger. Also, during defrosting mode, water on the heat exchanger evaporates, and water vapor may be emitted.
A
Abigail RichardsAug 29, 2025
Why does Mitsubishi Electric Air Conditioner fan speed change automatically?
- T
  Tamara JacksonAug 29, 2025
  The Mitsubishi Electric Air Conditioner automatically adjusts the fan speed gradually from lower to the set speed to prevent blowing out cold air at the beginning of heating operation. It also adjusts its fan speed to protect the fan motor when return air temperature or fan speed excessively rises.
N
Nathan HollowayAug 31, 2025
Why does my Mitsubishi Electric PEAD-RP35 emit white mist or vapor from the indoor unit?
- D
  David MooreAug 31, 2025
  If the indoor temperature and humidity are high, your Mitsubishi Electric Air Conditioner may emit a white mist or vapor when operation starts. Also, during defrosting mode, cool airflow may blow down and appear like a mist.
G
Gabriel FranklinSep 2, 2025
Why does my Mitsubishi Electric PEAD-RP35 Air Conditioner have an unpleasant odor?
- A
  Aaron FloresSep 2, 2025
  Your Mitsubishi Electric Air Conditioner might be drawing in air that contains gases produced from the walls, carpeting, and furniture, as well as odors trapped in clothing, and then blowing this air back into the room.
B
bobbywoodSep 3, 2025
Why does my Mitsubishi Electric PEAD-RP35 Air Conditioner make a flowing water or hissing sound?
- D
  David MorrisSep 3, 2025
  These sounds can be heard when refrigerant is flowing in the Mitsubishi Electric Air Conditioner or when the refrigerant flow is changing.
G
gallegoschristopherSep 5, 2025
Why does my Mitsubishi Electric PEAD-RP35 Air Conditioner make a cracking or creaking sound?
- B
  burnsjonathanSep 5, 2025
  These sounds can be heard when parts rub against each due to expansion and contraction from temperature changes in your Mitsubishi Electric Air Conditioner.

Mitsubishi Electric PEAD-RP35 Specifications

General

Cooling Capacity	3.5 kW
Heating Capacity	4.0 kW
Power Supply	220-240V, 50Hz
Refrigerant	R32
Indoor Unit Dimensions (HxWxD)	250 x 900 x 732 mm
Outdoor Unit Dimensions (HxWxD)	550 x 800 x 285 mm
Noise Level (Outdoor Unit)	48 dB(A)