To Next PageTo Next PageWhat to do if Mitsubishi Electric PUZ-HA36NKA Air Conditioner trouble is reoccurring?
If the trouble with your Mitsubishi Electric Air Conditioner is reoccurring, assess the problem and take corrective action as outlined in the “9-3. SELF-DIAGNOSIS ACTION TABLE”. Also, perform troubleshooting to identify the cause of the issue, referring to “9-4. TROUBLESHOOTING OF PROBLEMS”.
What to do if Mitsubishi Electric Air Conditioner trouble is not reoccurring and not logged?
If the trouble with your Mitsubishi Electric Air Conditioner is not reoccurring and not logged, re-check the abnormal symptom. If the cause isn't clear, continue operating the unit for the time being. Also, conduct troubleshooting and ascertain the cause of the trouble according to “9-4. TROUBLESHOOTING OF PROBLEMS”. There is no abnormality concerning of parts such as electrical component, controller board, remote controller, etc.
What to do if Mitsubishi Electric Air Conditioner trouble is not reoccurring and logged?
If the trouble with your Mitsubishi Electric Air Conditioner is not reoccurring but is logged, consider temporary issues like protection device activity in the refrigerant circuit including compressor, loose wiring, or electrical noise. Re-check the symptom, and check the installation environment, refrigerant amount, weather when the trouble occurred, matters related to wiring, etc. After finishing service, reset the error code logs and restart the unit. There is no abnormality in electrical component, controller board, remote controller, etc.
What to do if the trouble is not reoccurring and is logged on my Mitsubishi Electric PUZ-HA36NKA Air Conditioner?
If the trouble with your Mitsubishi Electric Air Conditioner is not reoccurring and is logged, it could be due to temporary defects like protection device activation in the refrigerant circuit (including the compressor), loose wiring, or noise. Re-examine the symptoms and inspect the installation environment, refrigerant level, weather conditions when the issue occurred, and wiring connections. Also, after servicing, remember to reset the check code logs and restart the unit.
What to do if the trouble is not reoccurring and is not logged on my Mitsubishi Electric Air Conditioner?
If the trouble with your Mitsubishi Electric Air Conditioner is not reoccurring and is not logged, re-check the abnormal symptom. If you cannot ascertain the cause, continue to operate the unit for the time being. Also, conduct troubleshooting and ascertain the cause of the trouble according to "10-4. TROUBLESHOOTING BY INFERIOR PHENOMENA".
General| Brand | Mitsubishi Electric |
|---|---|
| Model | PUZ-HA36NKA |
| Category | Air Conditioner |
| Language | English |
Critical safety guidelines and precautions for performing air conditioner repair work.
Fundamental safety guidelines to be strictly followed during service operations.
Guidelines for using R410A refrigerant safely and correctly.
Precautions and specifications for refrigerant piping installation and handling.
Schematic representation of the unit's electrical connections.
Diagram illustrating the refrigerant flow and components.
General troubleshooting steps based on unit conditions and check codes.
Troubleshooting steps for issues not indicated by specific check codes.
Displays and explains error codes when they occur.
Procedures for performing self-diagnosis and interpreting results.
