Mitsubishi Electric SEZ-KD18NA4 User Manual

M-Series - Controls (December 2016) 1
© 2016 Mitsubishi Electric US, Inc.
Due to continuing improvement, above specication may be subject to change without notice.
M-SERIES
Accessories
1. CONTROLS .......................................................................................................................................................................2
1-1. System Control..........................................................................................................................................................3
1-2. Wired Remote Controller [PAR-32MAA-J] ................................................................................................................ 6
1-3. Simple MA Remote Controller [PAC-YT53CRAU] ................................................................................................... 26
1-4. System Control Interface [MAC-333IF-E]................................................................................................................48
1-5. Wireless Adapter [PAC-WHS01WF-E] .................................................................................................................... 61
1-6. T-STAT Interface [PAC-US444CN-1] .......................................................................................................................73
1-7. Signal Receiver [PAR-SA9CA-E] ............................................................................................................................ 75
1-8. Wireless Remote Controller [PAR-FL32MA-E] ........................................................................................................ 79
1-9. Remote Sensor [PAC-SE41TS-E] ........................................................................................................................... 80
1-10. Connector Cable for Remote Display [PAC-SA88HA-E/PAC-725AD-E] ............................................................... 82
1-11. Remote Operation Adapter [PAC-SF40RM-E] ...................................................................................................... 86
1.12. System Control Interface [PAC-IF01MNT-E] ......................................................................................................... 90

Mitsubishi Electric SEZ-KD18NA4 Specifications

General

Brand	Mitsubishi Electric
Model	SEZ-KD18NA4
Category	Air Conditioner
Language	English

Summary

1. CONTROLS

1-1. System Control

Details on system control configurations and examples for various indoor units.

1-2. Wired Remote Controller [PAR-32MAA-J]

Information about the PAR-32MAA-J wired remote controller, including specs and installation.

1-3. Simple MA Remote Controller [PAC-YT53CRAU]

Details on the PAC-YT53CRAU simple MA remote controller, its functions, and wiring.

1-4. System Control Interface [MAC-333IF-E]

Information on the MAC-333IF-E system control interface for M-NET connection.

1-5. Wireless Adapter [PAC-WHS01WF-E]

Details on the PAC-WHS01WF-E wireless adapter for Wi-Fi connectivity.

1-6. T-STAT Interface [PAC-US444CN-1]

1-7. Signal Receiver [PAR-SA9CA-E]

Details on the PAR-SA9CA-E signal receiver for wireless remote controller use.

1-8. Wireless Remote Controller [PAR-FL32MA-E]

Information on the PAR-FL32MA-E wireless remote controller for P series and SEZ models.

1-9. Remote Sensor [PAC-SE41TS-E]

Details on the PAC-SE41TS-E remote sensor for room temperature pickup.

1-11. Remote Operation Adapter [PAC-SF40RM-E]

Details on the PAC-SF40RM-E remote operation adapter for non-voltage contact output.

1-12. System Control Interface [PAC-IF01MNT-E]

1-2. Wired Remote Controller [PAR-32MAA-J]

Installation/Wiring work

Step-by-step instructions for installing and wiring the remote controller.

Important

Remote controller button functions

Explanation of the functions of each button on the remote controller.

Turning on the power

Test run <Maintenance password is required.>

Instructions for performing a test run, requiring a maintenance password.

Initial settings (Remote controller settings)

Configuration of initial settings for the remote controller.

Administrator password setting

Setting or changing the administrator password for access control.

Service menu (Maintenance password is required.)

Accessing service functions via a maintenance password.

Test run (City Multi and Mr. Slim)

Input maintenance Info. (City Multi and Mr. Slim)

Function setting (Mr. Slim)

1-3. Simple MA Remote Controller [PAC-YT53CRAU]

How To Wire Transmission Line

Connecting to CITY MULTI control system

Connecting to M-Series and P-Series air conditioner

Selecting an installation site

Installation work

Details on the installation process, including drilling and sealing.

Test Run

Procedure for performing a test run of the unit.

Ventilation Setting

Function Selection for M-Series and P-Series

Setting functions for M-Series and P-Series indoor units from remote controller.

Function Selection for CITY MULTI

Setting functions for CITY MULTI indoor units from remote controller.

Setting the indoor unit Setting Value

Self diagnosis

Retrieving and resetting error history for self-diagnosis.

Remote Controller Check

Function to check the remote controller's status and troubleshoot issues.

1-4. System Control Interface [MAC-333IF-E]

Before Installation

Function and electric wiring of interface each part

Details on the functions and wiring connections of the interface unit parts.

Dip Switch Details

Explanation of the functions and settings of the dip switches.

Connecting the SYSTEM CONTROL Interface to a room air conditioner

Instructions for connecting the interface unit to a room air conditioner.

Connecting the SYSTEM CONTROL Interface with each system

Connecting with M-NET system

Procedure for connecting the system control interface to an M-NET system.

Connecting with MA remote controller

Instructions for connecting the system control interface with MA remote controllers.

Remote Control

Setting when using remote control (Select one between No.1 through 5 and set.)

Setting Signal Output

Interface status monitor

Mounting the SYSTEM CONTROL Interface Unit

1-5. Wireless Adapter [PAC-WHS01WF-E]

Connecting the Wi-Fi interface

Establishing Wi-Fi connection

Steps to establish a Wi-Fi connection using WPS-Push or WPS-PIN.

LED pattern

Switch Function

System Configuration

Device Configuration

DIP Switch Definitions (Factory default is OFF for all switches):

Defines the function of each dip switch.

Static Pressure Settings

1-6. T-STAT Interface [PAC-US444CN-1]

Card key/Window connection with the open/close switch

Back-up heating function

Details on the back-up heating function and its operation based on temperature.

1-7. Signal Receiver [PAR-SA9CA-E]

Connecting to Mr. SLIM air conditioner

How To Install

Step-by-step guide for installing the signal receiving unit.

Emergency Operation for Wireless Remote-controller

Emergency operation procedures when the remote control unit is not working.

1-11. Remote Operation Adapter [PAC-SF40RM-E]

Connecting to the Indoor Unit

Locally Procured Wiring

Wiring

Diagram and details for wiring the remote operation adapter.

How to Install

Instructions for mounting the remote operation adapter unit.

1-12. System Control Interface [PAC-IF01MNT-E]

How to Use / How to Install

Instructions for wiring the system control interface.

Wiring diagram

Attention for M-NET connection

Important points regarding shielded wire wiring for M-NET.

Switch setting