Mitsubishi Electric SEZ-KD12NA4 User Manual

M-Series - Controls (December 2016) 1
© 2016 Mitsubishi Electric US, Inc.
Due to continuing improvement, above specication may be subject to change without notice.
M-SERIES
Accessories
1. CONTROLS .......................................................................................................................................................................2
1-1. System Control..........................................................................................................................................................3
1-2. Wired Remote Controller [PAR-32MAA-J] ................................................................................................................ 6
1-3. Simple MA Remote Controller [PAC-YT53CRAU] ................................................................................................... 26
1-4. System Control Interface [MAC-333IF-E]................................................................................................................48
1-5. Wireless Adapter [PAC-WHS01WF-E] .................................................................................................................... 61
1-6. T-STAT Interface [PAC-US444CN-1] .......................................................................................................................73
1-7. Signal Receiver [PAR-SA9CA-E] ............................................................................................................................ 75
1-8. Wireless Remote Controller [PAR-FL32MA-E] ........................................................................................................ 79
1-9. Remote Sensor [PAC-SE41TS-E] ........................................................................................................................... 80
1-10. Connector Cable for Remote Display [PAC-SA88HA-E/PAC-725AD-E] ............................................................... 82
1-11. Remote Operation Adapter [PAC-SF40RM-E] ...................................................................................................... 86
1.12. System Control Interface [PAC-IF01MNT-E] ......................................................................................................... 90

Mitsubishi Electric SEZ-KD12NA4 Specifications

General

Brand	Mitsubishi Electric
Model	SEZ-KD12NA4
Category	Air Conditioner
Language	English

Summary

M-Series Controls

System Control

Overview of system control functionalities and configurations for M-Series.

Wired Remote Controller [PAR-32MAA-J]

Detailed information on the wired remote controller, including installation and operation.

Simple MA Remote Controller [PAC-YT53CRAU]

Features and specifications of the Simple MA remote controller for CITY MULTI and M-Series.

System Control Interface [MAC-333IF-E]

Interface for connecting multiple air conditioners for centralized control.

Wireless Adapter [PAC-WHS01WF-E]

Enables indoor unit communication with kumo cloud™ app and web via Wi-Fi.

T-STAT Interface [PAC-US444CN-1]

Adapter for inputting signals from an open/close switch and outputting ON/OFF signals.

Signal Receiver [PAR-SA9CA-E]

Enables the use of a wireless remote controller for SEZ and P series models.

Wireless Remote Controller [PAR-FL32MA-E]

Wireless remote controller for P series and SEZ models. Receiver is necessary.

Remote Sensor [PAC-SE41TS-E]

Picks up the room temperature at a remote position for accurate control.

Connector Cable for Remote Display [PAC-SA88HA-E/PAC-725AD-E]

Enables control of multiple units with a multiple remote control display.

Remote Operation Adapter [PAC-SF40RM-E]

Provides non-voltage contact outputs for signals and operation/stop input.

System Control Interface [PAC-IF01MNT-E]

Connects A-control MXZ models to M-NET via optional M-NET converter.