Mitsubishi Electric SEZ-KD09NA4 User Manual

M-Series - Controls (December 2016) 1
© 2016 Mitsubishi Electric US, Inc.
Due to continuing improvement, above specication may be subject to change without notice.
M-SERIES
Accessories
1. CONTROLS .......................................................................................................................................................................2
1-1. System Control..........................................................................................................................................................3
1-2. Wired Remote Controller [PAR-32MAA-J] ................................................................................................................ 6
1-3. Simple MA Remote Controller [PAC-YT53CRAU] ................................................................................................... 26
1-4. System Control Interface [MAC-333IF-E]................................................................................................................48
1-5. Wireless Adapter [PAC-WHS01WF-E] .................................................................................................................... 61
1-6. T-STAT Interface [PAC-US444CN-1] .......................................................................................................................73
1-7. Signal Receiver [PAR-SA9CA-E] ............................................................................................................................ 75
1-8. Wireless Remote Controller [PAR-FL32MA-E] ........................................................................................................ 79
1-9. Remote Sensor [PAC-SE41TS-E] ........................................................................................................................... 80
1-10. Connector Cable for Remote Display [PAC-SA88HA-E/PAC-725AD-E] ............................................................... 82
1-11. Remote Operation Adapter [PAC-SF40RM-E] ...................................................................................................... 86
1.12. System Control Interface [PAC-IF01MNT-E] ......................................................................................................... 90

Mitsubishi Electric SEZ-KD09NA4 Specifications

General

Heating Seasonal Performance Factor (HSPF)	10.5
Application	Residential
Cooling Capacity	9, 000 BTU/h
Heating Capacity	10, 900 BTU/h
Outdoor Unit Dimensions (W x H x D)	31-1/2 x 21-5/8 x 11-1/2 inches
Refrigerant	R410A
Power Supply	208/230V, 1-Phase, 60Hz

Summary

1. CONTROLS

1-1. System Control

Explains system control configurations, examples, and optional parts for various units.

1-2. Wired Remote Controller [PAR-32MAA-J]

Details the PAR-32MAA-J wired remote controller: features, specifications, installation, and operation.

1-3. Simple MA Remote Controller [PAC-YT53CRAU]

Describes the PAC-YT53CRAU simple MA remote controller: specifications, applicable models, wiring, and function selection.

1-4. System Control Interface [MAC-333IF-E]

Explains the MAC-333IF-E system control interface, its functions, wiring diagrams, and dip switch settings.

1-5. Wireless Adapter [PAC-WHS01WF-E]

Details the PAC-WHS01WF-E wireless adapter for Wi-Fi connectivity, setup, LED patterns, and switch functions.

1-6. T-STAT Interface [PAC-US444CN-1]

Describes the PAC-US444CN-1 T-STAT interface for connecting a thermostat and controlling back-up heating.

1-7. Signal Receiver [PAR-SA9CA-E]

Explains the PAR-SA9CA-E signal receiver, its specifications, installation, and operation for wireless remote control.

1-8. Wireless Remote Controller [PAR-FL32MA-E]

Details the PAR-FL32MA-E wireless remote controller for P series and SEZ models, including specifications and applicable models.

1-9. Remote Sensor [PAC-SE41TS-E]

Explains the PAC-SE41TS-E remote sensor for picking up room temperature, its specifications, and installation methods.

1-10. Connector Cable for Remote Display [PAC-SA88HA-E/PAC-725AD-E]

Describes the PAC-SA88HA-E/PAC-725AD-E connector cable for connecting to multiple remote control displays.

1-11. Remote Operation Adapter [PAC-SF40RM-E]

Details the PAC-SF40RM-E remote operation adapter for extracting non-voltage contact output and remote operation.

1-12. System Control Interface [PAC-IF01MNT-E]

Explains the PAC-IF01MNT-E system control interface for connecting A-control MXZ models to M-NET.