To Next PageTo Next PageWhat to do if my Mitsubishi Electric SRK50ZM-S does not work at all?
If your Mitsubishi Electric Air Conditioner isn't working, check a few things: * Ensure the power switch is turned on. * Verify the timer hasn't been set to the “ON” position. * Check for a power failure or a blown fuse.
Why is my Mitsubishi Electric Air Conditioner not cooling or heating properly?
If you're experiencing poor cooling or heating with your Mitsubishi Electric Air Conditioner: * Make sure the thermostat is set to a suitable temperature. * Check if the air filter is clean and not clogged. * Ensure all doors and windows are closed.
What to do if Mitsubishi Electric SRK50ZM-S Air Conditioner has poor cooling?
If your Mitsubishi Electric Air Conditioner is not cooling well, consider these factors: * Check if direct sunlight is entering the room. * Identify and address any heat sources in the room. * Reduce the number of people in the room if it's overcrowded.
General| Type | Split System |
|---|---|
| Cooling Capacity | 5.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Refrigerant | R32 |
| Outdoor Unit Noise Level | 50 dB(A) |
| Power Supply | 220-240V, 50Hz |
Details safety guidelines for installing the air conditioner unit.
Provides safety instructions for operating the air conditioner.
Identifies and explains the components of the indoor air conditioning unit.
Identifies and explains the components of the outdoor air conditioning unit.
Explains the remote control display, buttons, and indicator lights.
Lists and describes the accessories provided with the air conditioner.
Covers battery replacement, handling warnings, and troubleshooting.
Details how to operate the unit manually without the remote control.
Guidance for installing two units in the same room.
Explains how to lock the remote control to prevent operation errors.
Detailed explanation of each button on the remote control's operation section.
Describes the signal transmission process between remote and unit.
Step-by-step guide for setting the current time and day of the week.
Explains the automatic operation mode based on room temperature.
How to adjust temperature settings while in AUTO mode.
Guide to selecting different fan speed options for operation.
Instructions for selecting and operating different modes.
Specifies the operable temperature ranges for cooling and heating.
Details the mechanism, capacity, and defrosting of heat mode.
How to control the up/down and left/right airflow direction.
Explains how to set and use the memory flap feature.
Guide to activating and using the 3D AUTO airflow control.
How to set the sleep timer for automatic unit stop.
How to set the off-timer for automatic unit stop at a specific time.
How to set the on-timer for automatic unit start.
Instructions for using sleep timer and on-timer simultaneously.
Guidance for using ON-Timer and OFF-Timer together.
Explains the feature that starts operation early for optimal comfort.
How to activate the allergen clear function for air purification.
Guide to setting up to 28 programs for weekly timer operation.
Steps for setting individual timer programs for specific days.
Procedures for cancelling individual or collective timer settings.
How to view and confirm programmed weekly timer settings.
Instructions for activating high power for rapid cooling or heating.
Instructions for activating economy mode for energy saving.
How to set the unit's installation location for optimal airflow.
Diagrams showing airflow ranges based on installation location.
Guidance on choosing appropriate locations for unit installation.
Factors to consider regarding operating noise during installation.
Recommendations for regular inspection and maintenance.
Explanation of various unit sounds, steam, and operational notices.
List of critical issues that require contacting the dealer.
Guidance on operating multiple air conditioners simultaneously.
