To Next PageTo Next PageWhy is there a whistling noise from my Mitsubishi Electric SRK71ZK-S Air Conditioner outdoor unit?
If you hear a whistling noise from the outdoor unit of your Mitsubishi Electric Air Conditioner, it indicates that the revolution speed of the compressor is increasing or decreasing.
What to do if my Mitsubishi Electric Air Conditioner does not work?
If your Mitsubishi Electric Air Conditioner isn't working, check if the power switch is turned off. Also, verify that the timer hasn't been set to the “ON” position. Finally, check for a power failure or a blown fuse.
How to improve cooling of my Mitsubishi Electric SRK71ZK-S?
To improve the cooling of your Mitsubishi Electric Air Conditioner, check if direct sunlight is entering the room. Also, see if there's a heat source present in the room, and consider whether there are too many people in the room.
What to do if remote control signals are not received by Mitsubishi Electric SRK71ZK-S?
If your Mitsubishi Electric Air Conditioner isn't responding to the remote control, it might be because the signal receiver is exposed to direct sunlight or other bright light. Try to block the sunlight or reduce the intensity of the other light sources.
Why Mitsubishi Electric Air Conditioner does not restart immediately?
If your Mitsubishi Electric Air Conditioner doesn't restart immediately after being stopped (but the RUN light is on), wait for three minutes. The microcomputer's three-minute protection timer will automatically restart it.
Why Mitsubishi Electric Air Conditioner airflow is not blown out during heating?
If your Mitsubishi Electric Air Conditioner isn't blowing out air or blowing out not warm wind during heating and the RUN light blinks slowly, it may be automatically defrosting due to low outdoor temperature and high humidity. Please wait.
Why does my Mitsubishi Electric Air Conditioner make a slight gurgling sound?
If you hear a slight gurgling sound coming from your Mitsubishi Electric Air Conditioner, it's caused by refrigerating liquid moving within the unit.
Why does my Mitsubishi Electric SRK71ZK-S have a slight smell?
If you notice a slight smell coming from your Mitsubishi Electric Air Conditioner, it is caused by tobacco or cosmetics adhering to the unit.
Why does steam escape from my Mitsubishi Electric SRK71ZK-S during COOL operation?
If you see steam escaping from your Mitsubishi Electric Air Conditioner during COOL operation, it may occur if the room's temperature and humidity are very high. It should disappear as the temperature and humidity decrease.
Why Mitsubishi Electric SRK71ZK-S Air Conditioner airflow is not blown out during DRY operation?
If your Mitsubishi Electric Air Conditioner isn't blowing air when starting the DRY operation (but the RUN light is on), the indoor fan may have stopped to prevent re-evaporation of dehumidified moisture and to save energy.
General| Cooling Capacity | 7.1 kW |
|---|---|
| Heating Capacity | 8.0 kW |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Energy Efficiency Ratio (EER) | 3.5 |
| Energy Efficiency Ratio (Cooling) | 3.5 |
Guidelines and warnings for installing the air conditioner unit safely.
Important safety measures to follow during the operation of the air conditioner.
Safety guidelines and warnings concerning moving or repairing the air conditioner.
Identification and function of parts within the indoor air conditioner unit.
Identification and function of parts within the outdoor air conditioner unit.
Lists and describes the accessories provided with the air conditioner.
Instructions for replacing batteries and using the remote control holder.
How to operate the unit using the unit's ON/OFF button when the remote is unavailable.
Details on remote control buttons, their functions, and the display indicators.
Step-by-step guide to setting the current time on the remote control.
How to use the AUTO mode for automatic operation based on room temperature.
Adjusting temperature settings and fan speed for optimal comfort.
Recommended operating temperature ranges for cooling and heating.
Explanation of the heat pump mechanism and defrosting process in heating mode.
Instructions for adjusting vertical and horizontal airflow direction.
Using memory flap and activating multi-directional airflow for varied air distribution.
Setting the Sleep Timer for automatic unit shutdown after a set time.
Setting the Off-Timer for automatic unit stopping at a specified time.
Setting the On-Timer for automatic unit start at a specified time.
Combining Sleep Timer and On-Timer for sequential automatic operation.
Setting up the Program Timer for daily repeated ON/OFF operations.
Activating the Allergen Clear function to eliminate airborne allergens.
Using High Power mode for intensified operation for a limited duration.
Using Economy mode for energy-saving operation with adjusted cooling/heating.
Running the Self Clean function to remove moisture and control mold growth.
How the unit automatically resumes operation after a power interruption.
Advice for optimizing unit performance, energy efficiency, and comfort.
Procedures for maintenance before and during the operational season.
Detailed steps for cleaning air filters, the unit, and the air inlet panel.
Procedures for preparing the unit at the end of the cooling/heating season.
Procedures for preparing the unit at the beginning of the cooling/heating season.
Steps for installing and replacing various types of air-cleaning filters.
Selecting suitable installation locations and considerations for operating noise.
Steps to check before calling for service when the unit malfunctions.
Situations requiring dealer contact and how to report specific issues.
Information on simultaneous operation and features relevant to multiple units.
