To Next PageTo Next PageWhy does the compressor frequency lower on my Mitsubishi Electric Air Conditioner?
When the input current of your Mitsubishi Electric Air Conditioner exceeds the specified amperage (7A, 8A, 14A, or 16A depending on the model), the compressor frequency might decrease. This is normal, but you should check if the indoor filters are clogged, if the refrigerant is low, or if the indoor/outdoor unit air circulation is being short-cycled.
What to do if the Mitsubishi Electric SVZ-KP12NA fails to communicate?
If the communication between the indoor and outdoor units of your Mitsubishi Electric Air Conditioner fails for 3 minutes, check the connecting wire between the units. If the problem persists, replacing the indoor or outdoor P.C. board may be necessary.
What to do if discharge temperature thermistor exceeds 232 °F in Mitsubishi Electric SVZ-KP12NA Air Conditioner?
If the discharge temperature thermistor in your Mitsubishi Electric Air Conditioner exceeds 232°F (111°C), the compressor frequency might decrease. Check the refrigerant circuit and refrigerant amount.
What to do if the compressor connector is disconnected in Mitsubishi Electric Air Conditioner?
If the connector of the compressor is disconnected on your Mitsubishi Electric Air Conditioner, and the inverter check mode starts, verify that the compressor connector is properly connected.
What to do if discharge temperature is too low on Mitsubishi Electric SVZ-KP12NA Air Conditioner?
If the discharge temperature thermistor on your Mitsubishi Electric Air Conditioner has been 122°F [50°C] or less for 20 minutes, check the refrigerant circuit and refrigerant amount.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | SVZ-KP12NA |
| Category | Air Conditioner |
| Language | English |
