Need help?Do you have a question about the Mitsubishi Electric SW1DNN-WS0ADR-B and is the answer not in the manual?
General| Manufacturer | Mitsubishi Electric |
|---|---|
| Category | Controller |
| Model Code | SW1DNN-WS0ADR-B |
| Power Supply | 24 V DC |
| Operating Voltage | 24 V DC ±10% |
| Positioning Control | Yes |
| Built-in Ethernet Ports | 1 port |
| Built-in USB Ports | 1 port |
| Supported Programming Languages | Ladder, ST, FBD, SFC |
| Operating Temperature | 0 to +55 °C |
| Storage Temperature | -25°C to 75°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Shock Resistance | 147 m/s2 |
Safety measures and considerations for the design phase of MELSEC-WS safety controller systems.
Critical safety guidelines for the physical installation of the MELSEC-WS safety controller.
Essential safety instructions for correctly wiring the MELSEC-WS safety controller and its components.
Safety protocols for the initial startup and ongoing maintenance of the MELSEC-WS safety controller.
Interface for configuring hardware modules, inputs, outputs, and connected devices in the MELSEC-WS system.
Interface for programming safety logic using function blocks and managing I/O signals.
Guide to establishing an initial connection between a PC and the MELSEC-WS safety controller via RS-232.
Addresses common malfunctions in Flexi Link networks, including diagnosis and correction.
Steps for configuring and commissioning a new Flexi Line system, including hardware and logic.
Guides through the initial setup and commissioning of the first station in a Flexi Line system.
Crucial safety standards and regulations to observe when programming logic with function blocks.
Comprehensive list and description of available logic and application-specific function blocks.
Comprehensive test items for all safety functions, performed by qualified personnel.
To Next Page