To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric S-T21 and is the answer not in the manual?
General| Main Contact Material | Silver alloy |
|---|---|
| Number of Outputs | 16 |
| Program Memory | 8K steps |
| Mounting | DIN Rail Mount |
| Operating Temperature | 55°C |
| Storage Temperature | -20°C to 70°C |
| Coil Voltage | 24V DC |
Classifies hazards into WARNING (fatal/major injury) and CAUTION (minor injury/material damage) based on handling mistakes.
Highlights critical safety actions such as disconnecting power, avoiding live parts, not modifying, securing mounting space, and using correct wiring.
Details correct vertical mounting, tolerance limits, screw tightening torque, and environmental requirements for mounting.
Specifies minimum separation distances between contactors and grounding metal to ensure safety and prevent electrical interference.
Covers matching coil voltage/frequency and connecting wires to terminal screws with self-lifting plates.
Illustrates various wiring configurations for S-T series contactors with 3-phase and single-phase motors.
Presents wiring diagrams for S-2xT series contactors, covering different motor types and configurations.
Shows representative wiring diagrams for TH-T series contactors used with 3-phase and single-phase motors.
Explains how to adjust the thermal overload relay's settling current using the knob and the reset procedure after tripping.
