Mitsubishi Electric TRANE TPEFYP006MA144A User Manual

20 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

GBE

OPERATION MANUAL

For safe and correct use, please read this operation manual thoroughly before operating the air-conditioner unit.

MANUAL DE INSTRUCCIONES

Lea este manual de instrucciones hasta el nal antes de poner en marcha la unidad de aire acondicionado para garantizar un uso seguro y

correcto.

Air-Conditioners

INDOOR UNIT

TPEFYP006,008,012,015,018,024,027,030,036,048,054

MA144A

Other manuals for Mitsubishi Electric TRANE TPEFYP006MA144A

Installation Manual28 pages

Questions and Answers:

L
Lori LeeAug 3, 2025
Why my Mitsubishi Electric TRANE TPEFYP006MA144A does not cool or heat enough?
- C
  Chelsea WilsonAug 3, 2025
  There might be several reasons why your Mitsubishi Electric Air Conditioner isn't cooling or heating adequately: * The temperature might not be adjusted properly. Check the set and inlet temperatures on the display and adjust the settings. * The filter could be clogged with dust and dirt. Clean the filter. * Obstructions might be present at the air inlet or outlet of the indoor or outdoor units. Remove any obstacles. * Windows or doors might be open. Ensure they are closed.
R
Robert OwensAug 8, 2025
What to do if my Mitsubishi Electric TRANE TPEFYP006MA144A does not run?
- J
  James StaffordAug 8, 2025
  If your Mitsubishi Electric Air Conditioner isn't running, consider these potential causes: * There may have been a power failure. If so, press the [ON/OFF] button after power is restored. * The power supply might be turned off. Ensure the power supply is turned on. * The fuse in the power supply could be blown. Replace the fuse. * The earth leakage breaker might have tripped. Reset the earth leakage breaker.
M
Marie HarrisAug 11, 2025
What to do if my Mitsubishi Electric TRANE TPEFYP006MA144A Air Conditioner runs briefly, but soon stops?
- T
  Timothy WrightAug 11, 2025
  If your Mitsubishi Electric Air Conditioner starts and then stops quickly, it could be due to: * Obstacles at the air inlet or outlet of the indoor and outdoor units. Remove any obstructions, then restart the unit. * A dirty filter filled with dust and dirt. Clean the filter before restarting.
M
Morgan ButlerAug 16, 2025
Why cool or warm air does not come out of my Mitsubishi Electric TRANE TPEFYP006MA144A?
- D
  Don ZhangAug 16, 2025
  If your Mitsubishi Electric Air Conditioner is not emitting cool or warm air, it could be because: * The restart-preventing circuit is in operation for 3 minutes. Wait for a while, as this circuit protects the compressor and may delay its start. * The indoor unit operation was restarted during heating and defrosting. Allow the unit to complete the defrosting operation before heating begins.
T
tammy69Aug 20, 2025
Why does my Mitsubishi Electric TRANE TPEFYP006MA144A make noise after stopping?
- D
  Daniel PerkinsAug 20, 2025
  If you hear exhaust sounds and motor rotation after your Mitsubishi Electric Air Conditioner stops, it's likely because when other indoor units are engaged in cooling operation, the machine stops after running a drain-up mechanism for 3 minutes when air-cooling operation is stopped. Wait for 3 minutes.
S
Samantha NolanAug 25, 2025
Why my Mitsubishi Electric Air Conditioner makes intermittent noise after being turned off?
- S
  Stephanie Morton MDAug 26, 2025
  The intermittent noise from your Mitsubishi Electric Air Conditioner after it's turned off is likely due to drained water being processed when other indoor units are engaged in cooling operation. The drain-up mechanism initiates a draining operation. It should stop soon. If the noise occurs more than 2-3 times in an hour, ask for repair service.
J
James SanchezAug 28, 2025
Why warm air comes out intermittently from my Mitsubishi Electric TRANE TPEFYP006MA144A Air Conditioner during fan operation?
- A
  Amy BeckAug 29, 2025
  The intermittent warm air from your Mitsubishi Electric Air Conditioner, even when the thermostat is off or during fan operation, happens because when other indoor units are engaged in heating operation, the control valves are opened and closed from time to time to maintain the stability of the system. It should stop soon. If the room temperature rises uncomfortably high in a small room, stop operation.

Mitsubishi Electric TRANE TPEFYP006MA144A Specifications

General

Brand	Mitsubishi Electric
Model	TRANE TPEFYP006MA144A
Category	Air Conditioner
Language	English

Summary

Controller Interface

[ON/OFF] Button

Button to turn the indoor unit ON or OFF.

[SELECT/HOLD] Button

Button to save settings or enable/disable the HOLD function.

[RETURN] Button

Button to navigate back to the previous screen.

[MENU] Button

Button to access the Main menu.

Backlit LCD Display

The main display screen showing operation settings and icons.

ON/OFF Lamp

Indicator lamp showing the unit's operational status.

Function Buttons (F1-F4)

Buttons whose functions change dynamically based on the screen display.

Display Modes and Icons

Full Display Mode

Display mode showing all available icons and information.

Basic Display Mode

Display mode showing a simplified set of information.

Display Icons Explained

Explanation of various icons appearing on the main display screen.

Safety Precautions

Installation Safety

Precautions for safe installation to prevent injury or damage.

Operation Safety

Precautions to observe during normal operation of the unit.

Disposal Safety

Guidelines for safe and environmentally responsible disposal of the unit.

How to Operate

Turning ON/OFF

Procedure for turning the air conditioner unit on and off.

Operation Mode

Explanation of different operating modes like Cool, Dry, Fan, Auto, and Setback.

Set Temperature

How to adjust the desired temperature for cooling, drying, heat, and auto modes.

Fan Speed

How to adjust the fan speed settings for the air conditioner.

HOLD Setting

Information on enabling/disabling the HOLD function and its effects.

Smart Usage and Care

Setting Optimal Room Temperature

Tips for setting optimal room temperature for efficiency and comfort.

Filter Maintenance

Importance and procedure for cleaning the air conditioner filter.

Cleaning the Unit

Instructions on cleaning the air conditioner unit and its components.

Troubleshooting Common Issues

Pre-Repair Checks

Points to check before contacting service for issues like no operation or poor cooling.

Normal Operational Sounds

Common sounds or behaviors that are normal and not indicative of a fault.

Installation, Transfer, and Maintenance

Installation Location Guidelines

Recommendations for choosing the right place to install the air conditioner.

Electrical Work Requirements

Guidelines for proper electrical connections and safety.

Transferring Installation

Procedure and considerations for moving or reinstalling the unit.

Noise Considerations

Advice on minimizing noise during installation and operation.

Maintenance and Inspection

Importance of regular maintenance for performance and longevity.

Specifications

Technical Data by Model

Detailed technical specifications for different models of the indoor unit.

Related product manuals

TRANE TPEFYP008MA144A

TRANE TPEFYP012MA144A

TRANE TPEFYP015MA144A

TRANE TPEFYP018MA144A

TRANE TPEFYP024MA144A

TRANE TPEFYP030MA144A

TRANE TPEFYP036MA144A

TRANE TPEFYP048MA144A

TRANE TPEFYP054MA144A

TRANE TPEFYP MA144A Series

Preview: TRANE TPEADA0091AA70A

TRANE TPEADA0091AA70A

TRANE TPEADA0301AA70A