Mitsubishi Electric TRANE TPEFYP015MA144A User Manual

20 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

GBE

OPERATION MANUAL

For safe and correct use, please read this operation manual thoroughly before operating the air-conditioner unit.

MANUAL DE INSTRUCCIONES

Lea este manual de instrucciones hasta el nal antes de poner en marcha la unidad de aire acondicionado para garantizar un uso seguro y

correcto.

Air-Conditioners

INDOOR UNIT

TPEFYP006,008,012,015,018,024,027,030,036,048,054

MA144A

Other manuals for Mitsubishi Electric TRANE TPEFYP015MA144A

Installation Manual28 pages

Questions and Answers:

A
Alexis SandersAug 6, 2025
Why my Mitsubishi Electric TRANE TPEFYP015MA144A does not cool or heat enough?
- V
  Veronica RamirezAug 6, 2025
  There might be several reasons why your Mitsubishi Electric Air Conditioner isn't cooling or heating adequately: * The temperature might not be adjusted properly. Check the set and inlet temperatures on the display and adjust the settings. * The filter could be clogged with dust and dirt. Clean the filter. * Obstructions might be present at the air inlet or outlet of the indoor or outdoor units. Remove any obstacles. * Windows or doors might be open. Ensure they are closed.
S
Susan PalmerAug 10, 2025
What to do if my Mitsubishi Electric TRANE TPEFYP015MA144A Air Conditioner does not run?
- D
  Darren ThompsonAug 10, 2025
  If your Mitsubishi Electric Air Conditioner isn't running, consider these potential causes: * There may have been a power failure. If so, press the [ON/OFF] button after power is restored. * The power supply might be turned off. Ensure the power supply is turned on. * The fuse in the power supply could be blown. Replace the fuse. * The earth leakage breaker might have tripped. Reset the earth leakage breaker.
A
April PhamAug 14, 2025
What to do if my Mitsubishi Electric TRANE TPEFYP015MA144A runs briefly, but soon stops?
- M
  Mr. Robert SweeneyAug 15, 2025
  If your Mitsubishi Electric Air Conditioner starts and then stops quickly, it could be due to: * Obstacles at the air inlet or outlet of the indoor and outdoor units. Remove any obstructions, then restart the unit. * A dirty filter filled with dust and dirt. Clean the filter before restarting.
D
David MillerAug 18, 2025
Why cool or warm air does not come out of my Mitsubishi Electric TRANE TPEFYP015MA144A?
- S
  Stanley HowardAug 18, 2025
  If your Mitsubishi Electric Air Conditioner is not emitting cool or warm air, it could be because: * The restart-preventing circuit is in operation for 3 minutes. Wait for a while, as this circuit protects the compressor and may delay its start. * The indoor unit operation was restarted during heating and defrosting. Allow the unit to complete the defrosting operation before heating begins.
S
stantonmadisonAug 23, 2025
Why does my Mitsubishi Electric Air Conditioner make noise after stopping?
- B
  Brady WrightAug 23, 2025
  If you hear exhaust sounds and motor rotation after your Mitsubishi Electric Air Conditioner stops, it's likely because when other indoor units are engaged in cooling operation, the machine stops after running a drain-up mechanism for 3 minutes when air-cooling operation is stopped. Wait for 3 minutes.
S
Stacy GreenAug 27, 2025
Why my Mitsubishi Electric Air Conditioner makes intermittent noise after being turned off?
- D
  donaldclineAug 28, 2025
  The intermittent noise from your Mitsubishi Electric Air Conditioner after it's turned off is likely due to drained water being processed when other indoor units are engaged in cooling operation. The drain-up mechanism initiates a draining operation. It should stop soon. If the noise occurs more than 2-3 times in an hour, ask for repair service.
L
lisagarrisonAug 31, 2025
Why warm air comes out intermittently from my Mitsubishi Electric Air Conditioner during fan operation?
- B
  brooksfrankAug 31, 2025
  The intermittent warm air from your Mitsubishi Electric Air Conditioner, even when the thermostat is off or during fan operation, happens because when other indoor units are engaged in heating operation, the control valves are opened and closed from time to time to maintain the stability of the system. It should stop soon. If the room temperature rises uncomfortably high in a small room, stop operation.

Mitsubishi Electric TRANE TPEFYP015MA144A Specifications

General

Brand	Mitsubishi Electric
Model	TRANE TPEFYP015MA144A
Category	Air Conditioner
Language	English

Summary

Wired Remote Controller Interface

Controller Interface Overview

Describes the interface and buttons of the wired remote controller.

Safety Precautions

Installation Safety

Safety precautions related to the installation of the unit.

Operation Safety

Safety precautions to observe while operating the unit.

Unit Parts and Operation

Turning the Unit ON/OFF

How to turn the indoor unit on and off using the remote.

Operation Modes

Explains different operation modes like Cool, Drying, Fan, Auto.

Setting the Temperature

Details how to set the desired temperature for various modes.

Fan Speed Adjustment

Troubleshooting Common Issues

Unit Not Running

Checks to perform when the air conditioner unit does not run.

Remote Controller Display Issues

Checks to perform when the remote controller has no display.

Insufficient Cooling or Heating

No Airflow (Cool/Warm)

Unit Stops After Brief Operation

Post-Operation Sounds

Intermittent Warm Air During Fan Operation

Installation and Transfer Guidelines

Installation Location Advice

Electrical Work Requirements

Related product manuals

TRANE TPEFYP012MA144A

TRANE TPEFYP018MA144A

TRANE TPEFYP006MA144A

TRANE TPEFYP008MA144A

TRANE TPEFYP024MA144A

TRANE TPEFYP030MA144A

TRANE TPEFYP036MA144A

TRANE TPEFYP048MA144A

TRANE TPEFYP054MA144A

TRANE TPEFYP MA144A Series

Preview: TRANE TPEADA0091AA70A

TRANE TPEADA0091AA70A

TRANE TPEADA0301AA70A