EN-23
MENU function
■
MENU function is used for setting the Wireless LAN connection setting, Backlight setting, Display brightness adjustment, SELF CLEAN
operation, Fan control in heating thermo - OFF, SILENT mode setting and Wireless LAN communication setting.
1
Every time the MENU switch is pressed with the tip of
a ballpoint pen, etc., the display is switched in order of:
Backlight setting
2
Select the Backlight on/off by pressing “ or (TEMP/
TIMER)” button.
■ The backlight can be turned on/off.
Select the Backlight setting by pressing the MENU
switch.
1
Press the ON/OFF button.
3
SILENT mode
setting
Fan control in heating
thermo - OFF
Wireless LAN
communication setting
SELF CLEAN
operation
Display brightness
adjustment
Wireless LAN
connection setting
Backlight
setting
Wireless LAN connection setting
■ For Wireless LAN connection setting, refer to another user’s manual.
• If the communication status is poor due to radio wave interference by an obstacle, microwave oven and so on, the operation contents
may not be reflected. Check the operational status periodically.
• The operation contents of your smartphone are not reflected to the remote control display. The contents set by the remote control
are reflected to the application (Smart M-Air).
Backlight on
(Default)
Backlight off
NOTICE
RLH012A004_EN.indd 23
2023/05/18 13:31
To Next Page
Loading...
Need help?
General
