To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Heavy Industries FDTC50VD and is the answer not in the manual?
General| Brand | Mitsubishi Heavy Industries |
|---|---|
| Model | FDTC50VD |
| Category | Air Conditioner |
| Language | English |
Details on operation control functions for SRK, SRF, and SRR series units via remote controller.
Details on operation control functions for FDTC series units, including remote controller.
Overview of heating operation, including capacity control and component functions.
Overview of cooling operation, including capacity control and component functions.
Explanation of the automatic operation mode determination based on temperatures.
Control over unit operation via external signals and jumper settings on indoor PCB.
Management of external control signals, remote display outputs, and input signals.
Details on various protective control mechanisms for system safety and fault prevention.
Maintenance data, cautions, and troubleshooting procedures for SRK, SRF, and SRR series.
Diagnosing microcomputer circuits and troubleshooting flows for FDTC series.
Wiring diagrams illustrating connections for various outdoor unit models.
Wiring diagrams for indoor units: Wall, Floor, Ceiling concealed, and Cassette types.
Diagrams illustrating piping systems for outdoor units of different capacities.
Guidelines and safety precautions for installing outdoor units.
Detailed steps for installing various indoor unit types: SRK, SRF, SRR, FDTC.
Instructions for proper drainage setup for the outdoor unit to prevent water issues.
Guidelines for correctly connecting power supply and inter-unit cables.
Procedures for connecting refrigerant pipes, including flaring and insulation.
Steps for conducting air purging on connected indoor units for system integrity.
Instructions for applying heat insulation to refrigerant pipe joints to prevent issues.
Warnings and guidelines for correct refrigerant piping and electrical wiring connections.
Importance and methods of carrying out proper earth work for safety.
Checkpoints and procedures for post-installation testing and customer handover.
Installation details for SRK series wall-mounted indoor units.
Guidelines for selecting optimal installation locations for indoor units.
Instructions for installing supports for refrigerant and drain piping.
Procedures for removing and attaching the indoor unit's front panel.
Steps for installing the indoor unit's mounting board and related components.
Guidance on drilling holes and installing sleeves for piping and wiring.
Information on routing refrigerant and drain pipes for indoor units.
Installation details for SRF series floor-standing indoor units.
Installation details for SRR series ceiling-concealed indoor units.
Installation details for FDTC series ceiling cassette indoor units.
Instructions for setting the combined upper and lower air outlet positions for optimal airflow.
Procedure for adjusting airflow direction to specific positions using the remote control.
