To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Heavy Industries HSB60-W and is the answer not in the manual?
General| Model | HSB60-W |
|---|---|
| Category | Heat Pump |
| Manufacturer | Mitsubishi Heavy Industries |
| Cooling Capacity | 6.0 kW |
| SEER | 6.1 |
| SCOP | 4.0 |
| Outdoor Unit Noise Level | 52 dB(A) |
| Power Supply | 220-240V, 50Hz |
Essential safety information, warnings, and cautions for using the product correctly.
Critical safety measures to be followed during the installation process of the heat pump.
Safety protocols and warnings to observe during the daily operation of the heat pump.
Explains the function of the RC-HY20/40-W control module and its components.
Guides on setting desired temperature for heating and cooling, with or without room sensors.
Guides on scheduling heating and cooling temperatures for weekdays and vacation periods.
Explains how to set and adjust heating and cooling curves based on outdoor temperature.
Detailed settings for cooling operation, including temperature differences, sensor inputs, and start conditions.
Guides on setting temporary lux, comfort modes, and scheduling for hot water.
Provides access to service info, compressor status, alarms, and indoor temperature logs.
Guides on adjusting heat pump settings, including operating modes, pool heating, and internet connectivity.
Configuration for connecting the RC-HY20/40-W to the internet, including myUpway and TCP/IP settings.
Optimizes heat pump consumption based on electricity price to achieve savings.
Allows selection of operating modes like auto, manual, or additional heat only for the heat pump.
Procedures for managing alarms, interpreting error messages, and using aid mode for malfunctions.
Tips for identifying and resolving operational interferences not shown on the display.
Steps to diagnose and fix issues related to insufficient hot water temperature or supply.
Solutions for issues causing low indoor temperatures, including thermostat and curve adjustments.
