Need help?Do you have a question about the Mitsubishi Heavy Industries SKM35ZF-S and is the answer not in the manual?
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Indoor Unit Dimensions (W x H x D) | 845 x 275 x 228 mm |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 290 mm |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Type | Split System |
Details on piping length, connectable units, capacities, and inverter functions.
Explanation of the model naming convention with a diagram.
Technical specifications for various indoor unit models (SKM, STM, SRRM).
Operating limits and restrictions for different air conditioner models.
Dimensional drawings for indoor units (SKM, STM) and outdoor units (SRRM).
Diagrams illustrating the refrigerant piping for various models.
Charts for correcting capacity based on temperatures and piping length.
Wiring diagrams and component identification for indoor and outdoor units.
Explains the functions of the wireless remote control buttons.
Describes the function of the unit's ON/OFF button.
Details forced operation for drain motor in specific models.
Explains automatic restart after power interruption.
Controls flap movement using the AIRFLOW button.
Describes setting the comfortable timer for ON/OFF operations.
Details cooling operation, capacity control, and mode switching.
Details heating operation, capacity control, and mode switching.
Describes automatic mode determination and temperature settings.
Explains how cooling, heating, and fan modes are determined.
Details external control and input signal connections.
Explains control of operation based on jumper wires and signals.
Describes various control and protection functions.
Crucial safety warnings for installation and usage of air conditioning systems.
Guidance on installing wall-mounted indoor units (SKM).
Guidance on installing 4-way ceiling cassette indoor units (STM).
Guidance on installing ducted indoor units (SRRM).
Instructions for installing the remote control.
Guidelines for selecting and installing outdoor units.
Instructions for connecting power and crossover wires.
Details on refrigerant piping limits, diameters, and connections.
Procedures for testing and handling the unit after installation.
Instructions for installing optional wired remote controls and adapters.
Details on installing optional parts for ducted units.
Systematic troubleshooting guide for common issues.
General information about R410A refrigerant and safety.
Details on piping materials, joints, processing, and brazing.
Procedures for installing, removing, and servicing the system.
Procedures and tools for refrigerant recovery.
To Next Page
